Motorola JT-1000 - SERVICE Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Tragbares Radio Motorola JT-1000 - SERVICE herunter. Motorola JT-1000 - SERVICE 42 Seiten. Motorola jt 1000 portable radio

Seite drucken
Motorola JT-1000 - SERVICE Benutzerhandbuch
5
Getting Started (cont.)
Figure 1.
4
three-position
(ABC) toggle switch
Controls, Switches,
Indicators, and
Connectors
1 on/off/volume control
7 side button 1
8 side button 2
9 side button 3
10 push-to-talk
(PTT) switch
11 display
15 keypad
Table 1. Switch, Button, and Keypad Programming
3-Position Toggle
Feature
A
B
Carrier Squelch
X*
Change Squelch Setting
DTMF Access/Exit
Keypad Lock
Light
Mode-Slaved Squelch
X*
Monitor
Mon/Scan Program Status
Multiple Select PL
PAC•RT
X
X
Repeat/Talkaround
X
X
Single Tone Encode
Scan On/Off
X
X
Scan/Program Status
Scan/Scan Program
X
Sel/Program/Number–Edit
Variable RF Power
X
X
Note: * = Feature is programmed at shipment to this switch or button.
X = Feature can be programmed to this switch or button.
3 two-position concentric switch
5 indicator LED
A
6 orange top button
B
C
2 channel selector
13 universal
connector
JT 1000
12 microphone
14 noise-
cancelling
port
1
2
3
AB C
D E F
4
5
6
GHI
JKL
MNO
7
9
8
P R S
TUV
W X Y
0
HOME
Side Button
Top
2-Position Keypad
Button
Concentric
C
1
2
3
X*
X*
X*
X
X
X
X
X
X*
X
X
X
X*
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X*
X

Universal Connector Seal Removal

When not in use, keep the side connector covered using the
universal connector seal provided.
Touching the top two contacts of the universal connector when
transmitting could result in a radio frequency burn.
Push
Off
Universal
Connector
Seal

Controls, Switches, Indicators, and Connectors

(Refer to Table 1/Figure 1 for Switch and Button Programming Information)
1
On/Off/Volume Control – Turns the radio on and off, and adjusts the volume
level.
2
Channel Selector – Selects the operating channel (1-16).
3
Two-Position Concentric Switch (
and Multiple Select PL lock/unlock.
4
3-Position Toggle Switch (A B C) – RSS programmable. User selects feature.
5
LED Indicator – Indicates the radio operating status; green/red light-emitting
diode (LED).
Menu
6
Orange Top Button – DTMF mode enable/disable.
7
Side Button 1 (Blue/Teal) – Radio Service Software programmable, serves as
X
a program/edit button.
8
Side Button 2 – Radio Service Software programmable, and inputs Multiple
select PL.
9
Side Button 3 – Radio Service Software programmable, default from factory is
monitor.
10 Push-To-Talk (PTT) Switch – Engages the transmitter and puts the radio in the
transmit mode.
11 Display – Provides visual information to the user.
12 Microphone Port – Accepts voice input to the radio's microphone.
13 Universal Connector – Provides access for Radio Service Software
programming and side-connector programming key, testing, and accessory
connections.
14 Noise-Cancelling Port – Reduces background noise during transmit.
15 Keypad – Provides control and data interface.
X
6
Getting Started (cont.)
!
WARNING
If the universal connector seal is attached to
the radio:
1.
Turn the radio off when removing the
seal.
2.
Grasp the radio as illustrated, and push
your thumb against the tabbed portion of
the seal with enough force to unsnap the
universal connector seal from the radio.
3.
Rotate the seal around the antenna to
m o v e i t a w a y f r o m t h e u n i v e r s a l
connector; slide the seal off of the
antenna and completely away from the
radio.
) - Keypad Lock, orange button (DTMF),