Dimas MX 140 E Betriebsanleitung - Seite 8

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Elektrowerkzeug Dimas MX 140 E herunter. Dimas MX 140 E 20 Seiten. Mixer

Seite drucken

This symbol indicates that the

machine is in conformance with

the applicable European directive.

0$1'$725<

:$51,1*

These signs give advice

concerning your safety

Instruction plate

7<3(

MX 140 E

120,1$/

9 a

92/7$*(

n 0 580 rpm

23(5$7,1*

63(('

SPECIAL INSTRUCTIONS

The mixer is designed to operate safety and

reliaby when used according to the

instructions. To avoid danger to the

operator and maintain the mixer in good

working order, regular inspections should

be carried out on site. Check :

• Perfect technical condition (use for the

purpose for which it is intended and

taking into account any risks, and

correction

detrimental to safety).

• Competent staff (qualifications, age,

training)

who

understood the manual in detail

before starting work : any electrical,

mechanical or other problem should

be investigated by a qualified

maintenance engineer (electrician,

maintenance manager, approved

dealer, etc . . .).

• That the warnings and instructions

marked on the machine are followed

(adequate personal protection, correct

use, general safety instructions, etc).

• That no modification, transformation

or addition is detrimental to safety and

that it is carried out without prior

authorization from the manufacturer.

• Respect of the maintenance intervals

and periodical checks recommended.

• That only genuine spare parts are

used for repairs.

FAILURE TO COMPLY WITH

THESE WARNINGS COULD

RESULT IN DEATH OR SERIOUS

BODILY INJURY.

• Read the instructions carefully and ensure

,1',&$7,21

that you have understood them before

,1)250$7,21

using the machine.

,16758&7,21

• Always keep the safety devices in

352+,%,7,21

position.

• Always wear the approved ear and/or eye

protectors, helmet and breathing

apparatus.

• Store the machine properly. The machine

must be stored in a dry, locked place, out

of the reach of children.

6(5,$/

• Know how to stop the machine quickly in

5$7,1*

an emergency.

722/

(19,5210(17$/

4,3 Kg

3527(&7,21

• Check the machine, cable and plug before

use.

:(,*+7

)5(48(1&< +]

• Only have the machine repaired by a

specialist.

• Use the appropriate machine. Do not use

machines that are not powerful enough

and do not use adapters for heavy work.

• Wear suitable clothing. Do not wear

jewellery : they might get caught in

moving parts.

• Wear gloves and non-slip shoes when

working outdoors.

• Use a dust extractor and wear a dust

mask (dust is a health hazard).

• Keep the handles dry and free of oil and

grease.

any

malfunction

• Always take care. Watch what you are

doing. Act sensibly.

have

read

and

• Do not use equipment or tools that are

damaged.

• Do not operate the machine in areas

where there are combustible materials.

• Do not plug in if the switch is not off.

• Do not use the machine in wet conditions.

• Do not allow people under 16 years old to

operate the machine.

• Do not use tools for work for which they

are not designed.

• Do not carry the machine by the cable. Do

not pull the cable to unplug. Protect the

cable from heat, petrol and sharp edges.

• Do not leave the machine unattended

while the motor is running.

• Do not use the machine if you are under

the influence of alcohol or drugs.

DO' S

DON'TS

Use

• Application : mixing construction

materials.

• Tool : mixers with M14 internal thread.

Technical specifications

• Rating : 1100 W

• Nominal voltage : 230 V

• Frequency : 40-60 Hz

• Operating speed : 0 to 580 rpm

• Interference

suppression

accordance with EN 55014 and EN6160

• Electrical protection : Class II

• Environmental protection : IP20

• Net weight : ca 4.3 kg

• Noise level : Based on DIN 45649 part 2

- DIN 45635 part 21 and DIN EN 27574

(ISO 7574)

¤ Noise level (LwAc) (94+3) dB rel 1pW

Operator noise level (LpA) 86 dB

Off load in accordance with DIN 45635

- 21 - KL2

¤ Noise level (LwAc) 88 dB rel 1pW

Operator noise level (LpA, cyclic) 79 dB

Under load (without working the part to

be machined) in accordance with DIN

45000 standards

Check before starting

Please read the instructions for

use prior to operating the

machine for the first time.

Motor off.

The working area must be

completely cleared, well lit and

all safety hazards removed (no

water or dangerous objects in

the vicinity).

The operator must wear

protective

appropriate to the work he

is doing. We recommend

that this includes both eye

and ear protection.

The use of ear protection is

mandatory.

Any persons not involved in the

work should leave the working

area.

clothing