Epson LW-K400 Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Etikettenhersteller Epson LW-K400 herunter. Epson LW-K400 10 Seiten.
Auch für Epson LW-K400: Setup-Handbuch (2 seiten)
Seite drucken
LW-K400
User's Guide
Before use
1. Preparing the power supply
This product operates on batteries or with the dedicated AC adapter.
Using on batteries
c
Prepare six AA alkaline batteries.
1. Remove the cover on the rear.
2. Insert the batteries.
MEMO
When continuing to install a tape cartridge, leave the cover off and
go to Step 2.
3. Close the cover. Close it until it snaps into place.
Using with the AC adapter (APT0615Z)
c
Make sure to use the dedicated AC adapter (APT0615Z).
1. Connect the AC adapter firmly into the power socket of the
product.
2. Plug the AC adapter into the outlet.
2. Installing a tape cartridge
1. Remove the slack of the ink ribbon.
2. Remove the cover on the rear.
3. Set the tape cartridge.
Press it firmly until it snaps into place.
When installing a new tape or the tip of the tape is longer than
usual, put the tape through the "Tape Guide" slot.
• Do not press the "Cut Button" before the tape stops.
c
• Do not pull the tape out with your fingers.
4. Close the cover on the rear.
Close it until it snaps into place.
How to remove the tape cartridge
c
Hold the cartridge by the tabs, and lift it straight up.
3. Turning the power on
1. Press
.
When changing the language of messages on the display
sDisplay Settings ("Display" menu)
4. Feeding the tape
c
Do not press the "Cut Button" before the tape stops.
After setting a tape cartridge, make sure to feed tape.
1. Press
+
.
2. Press
.
3. Cut the tape.
Cut it by pressing the "Cut Button".
5. Creating a label
Example: ABC
1. Press
while holding down
2. Press the following keys:
"ABC" appears on the display.
Refer below for other operations and the labels you can create with
this product.
sEditing characters, Useful functions, Creating a label with a
special form
to enter text in capital letters.
,
,
3