Motorola Verizon moto g6 Benutzerhandbuch - Seite 15
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kopfhörer Motorola Verizon moto g6 herunter. Motorola Verizon moto g6 26 Seiten. Wireless bluetooth headset
Auch für Motorola Verizon moto g6: Benutzerhandbuch (32 seiten), Faq Blatt (15 seiten), Benutzerhandbuch (5 seiten)
Seite drucken
9. If you are flushing, run the pump long
enough to thoroughly clean the pump and
hoses.
10. Close the dispensing valve, if used.
11. Close the bleed-type master air valve.
Pump Shutdown
At the end of the work shift and before you
check, adjust, clean or repair the system, follow
Pressure Relief Procedure, page 14.
Maintenance
Maintenance Schedule
Establish a preventive maintenance schedule,
based on the pump's service history. Scheduled
maintenance is especially important to prevent
spills or leakage due to diaphragm
failure.
Lubrication
The pump is lubricated at the factory. It is
designed to require no further lubrication for the
life of the pump.
Tighten Threaded Connections
Before each use, check all hoses for wear or
damage and replace as necessary. Check to be
sure all threaded connections are tight and
leak-free. Check fasteners. Tighten or retorque
as necessary. Although pump use varies, a
general guideline is to retorque fasteners every
two months. See Torque Instructions,
page 16.
Flushing and Storage
Flush before fluid can dry in the equipment,
•
at the end of the day, before storing, and
before repairing equipment.
Flush at the lowest pressure possible. Check
•
connectors for leaks and tighten as neces-
sary.
Flush with a fluid that is compatible with the
•
fluid being dispensed and the equipment
wetted parts.
Flush the pump often enough to prevent the
fluid you are pumping from drying or freezing in
the pump and damaging it. Use a compatible
solvent.
Always flush the pump and relieve the pressure
before storing it for any length of time.
859.0088
15