Motorola iM1100 Benutzerhandbuch - Seite 24

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Modem Motorola iM1100 herunter. Motorola iM1100 42 Seiten. For windows 95, windows 98, windows 2000, and windows nt

LOGO HERE
Changing the PIN
To change your SIM PIN:
1. From the User Settings window, enter your current 4- to 8-digit PIN.
An asterisk appears for each character entered.
2. Enter your new 4- to 8-digit PIN. Enter it again to verify it.
3. Click OK.
Unblocking the PIN
If you forget your PIN and unsuccessfully enter it three times, access to your
iM1100 will be blocked.
NOTE: Before you begin, obtain the PIN Unblocking Key (PUK) code
from your service provider, then read and understand the PIN
unblocking sequence. In entering the key press sequence, each
key press must occur within 5 seconds of the prior key press.
!
C a u t i o n
Disabling/Enabling the PIN Requirement
When the PIN requirement is enabled, you are prompted to enter your PIN each
time you turn on your modem. Until a valid PIN is entered, you can not use the
modem.
After the PIN is accepted, the modem registers on the network and the idle
screen displays.
20
If you unsuccessfully enter the PUK code
ten times, the SIM card is permanently
blocked and must be replaced. If this
happens, all data will be lost. You will get a
message to contact your service provider. If
the SIM card is blocked, the modem only
allows outgoing Emergency calls.
www.motorola.com/iden