Epson 4000 - Stylus Pro Color Inkjet Printer Informationen zum Produkt - Seite 11

Blättern Sie online oder laden Sie pdf Informationen zum Produkt für Software Epson 4000 - Stylus Pro Color Inkjet Printer herunter. Epson 4000 - Stylus Pro Color Inkjet Printer 13 Seiten. Print engine
Auch für Epson 4000 - Stylus Pro Color Inkjet Printer: Broschüre & Specs (4 seiten), Produkt-Referenzhandbuch (38 seiten), Start Here Handbuch (6 seiten), Produkt-Support-Bulletin (17 seiten), Wichtige Informationen (2 seiten), Eingeschränkte Garantie (12 seiten), Kurzreferenz-Handbuch (11 seiten), Broschüre & Specs (12 seiten), Broschüre & Specs (6 seiten), Setup-Handbuch (16 seiten)

Epson 4000 - Stylus Pro Color Inkjet Printer Informationen zum Produkt
10. Push down on the side pin while turning the latch to the
left.
11. Close the top cover when you see a message prompting you
to do so. The cutter moves to the home position.

Replacing the Maintenance Tank

When the maintenance tank is almost full, the message MNT
TK NEAR FULL appears on the LCD panel. When the tank
is completely full, the printer stops working and MNT TK
FULL appears on the panel.
You can check how much space remains in the maintenance
tank by viewing its indicator on the control panel, shown
below. You can also check its status using the SelecType menu
or by printing a nozzle check sheet (page 8).
Maintenance
tank indicator
(showing a
new tank)
Replacement tanks are available from
Epson (part number C12C890071).
Follow these steps to replace the tank:
1. Make sure the printer is not printing or performing any
other operations (READY or PAPER OUT should appear
on the control panel).
2. If you are using 220 ml ink cartridges, remove the four
cartridges from the right ink compartment, then close the
compartment cover.
3. Place your hand under the right ink compartment and
gently pull out the maintenance tank.
CAUTION: Be careful not to spill ink from the tank when
removing it. Hold it upright at all times.
4/04
Epson Stylus Pro 4000
Epson Stylus Pro 4000 - 11