Philips 13LT010L/99 Gebrauchsanweisung - Seite 8
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für TV Philips 13LT010L/99 herunter. Philips 13LT010L/99 13 Seiten. Philips portable tv instruction manual dfu lo1-2k2
Seite drucken
3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL
CABLE TUNING (OFF / ON)
Your Philips television can be configured to operate in either Cable TV or broadcast / off-air tuning modes. In other
words, the TV must be configured depending upon whether a Cable TV signal or a normal antenna signal is applied to
its 75-ohm ANT/CABLE plug.
With the Menu onscreen, press the Menu button repeatedly, or use the Cursor Up and Down buttons, to select CABLE
TUNING with the TV's highlight control bar. Press the Cursor Right or Left button on the remote to select ON if you
DO have Cable TV connected to the TV, and Channels 1-125 may then be selected. Or, select OFF if you have an Antenna
connected to the TV, and then only channels 2-69 may be selected. Press STATUS/EXIT to remove the on-screen menu.
CURRENT RING (HC MODELS ONLY)
Highlight CURRENT RING, then press the < or > button to select 1 through 4. There are four custom CHANNEL RINGS
that can be setup within the CHANNEL INSTALL feature.
BRIGHTNESS, COLOR, CONTRAST, SHARPNESS, TINT
Use the cursor-up and cursor-down buttons to select the picture parameter you wish to adjust. Use cursor left (<-) and
cursor right (+>) to adjust the picture parameter.
NOISE REDUCTION (ON/OFF)
This feature reduces video noise in the displayed picture. Effectively reduces noise while having maximum peaking in
the bright parts of the picture. Differs from reducing Sharpness (see Sharpness) in that noise is reduced, but picture
detail is preserved.
SOUND MODE (MONO / STEREO)
Use cursor left (<-) and cursor right (+>) to select monaural or stereo audio mode.
SAP (OFF / NO SAP / ON)
Second Audio Program (SAP) is part of the stereo broadcast system. Sent as an additional audio channel SAP can be
heard apart from the current TV program sound. TV stations are free to use SAP for any number of purposes, but may
be used for foreign language translations of TV shows (or for weather and news bulletins). If a SAP signal is not pres-
ent with a selected program the SAP option cannot be selected
AUDIO OUT (FIXED / VARIABLE)
When the FIXED audio out option is selected, the left and right audio outputs are fixed at a nominal 0.5vrms signal
level, and are unaffected by the television's volume control setting. When the VARIABLE audio out option is selected,
the left and right audio outputs are controlled by the television's volume control setting, and variable between 0.2vrms
and 2vrms nominal signal levels.
BALANCE / TREBLE / BASS (
Use the cursor-up and cursor-down buttons to select the audio parameter you wish to adjust. Use cursor left (<-) and
cursor right (+>) to adjust the audio parameter.
INCREDIBLE STEREO (ON / OFF)
Processes the left and right audio channels to achieve a perceived increase in channel separation and spatial effect. Use
cursor left (<-) and cursor right (+>) to turn this feature on and off.
AVL (ON / OFF)
Automatic volume leveling restricts the volume variation of audio signals to a relatively small range by boosting low-
level signals and reducing louder signals, thus maintaining a consistent volume level. Use cursor left (<-) and cursor
right (+>) to turn this feature on and off.
H
T
U
T
O
-S
OW
O
SE
HE
N
)
-----||||| nn
* COMMERCIAL FEATURE
M
(C
CREEN
ENU
ONTINUED
SETUP x
CONSUMER x
SETUP x
CONSUMER _
SETUP x
CONSUMER x
SETUP x
CONSUMER x
SETUP x
CONSUMER x
SETUP x
CONSUMER x
SETUP x
CONSUMER x
SETUP x
CONSUMER x
SETUP x
CONSUMER x
SETUP x
CONSUMER x
8
)
FEATURES MENU
FEATURES MENU
FEATURES MENU
FEATURES MENU
FEATURES MENU
FEATURES MENU
FEATURES MENU
FEATURES MENU
FEATURES MENU
FEATURES MENU
_
_
_
_
_
_
_
_
_
_