Philips 14PV201 Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für TV Philips 14PV201 herunter. Philips 14PV201 17 Seiten. Philips philips tv-video combi user's manual
Seite drucken
Manual TV channel search
In some cases it can occur that all TV channels
are not found and saved during the first installa-
tion. In this case, the missing TV channels must
be searched for and stored manually.
1.
1.
Press
. The main menu will appear.
MENU
2.
2.
Select 'TUNER SET UP' with
and confirm with
STOP C-L
3.
3.
Select 'MANUAL TUNING' with
and confirm with
STOP C-L
4.
4.
Select 'PROG.' with
.
press
FWD 1- B
MANUAL TUNING
PROG.
CHANNEL
DECODER
SKIP
SELECT K L CHOOSE B
END=EXIT
5.
5.
With
PLAY B-K
STOP C-L
desired programme number that you want to
use for the TV channel, e.g. 'P01'. Then press
.
FWD 1- B
What is a special channel?
TV channels are transmitted in certain pre-defined
frequency ranges. These ranges are divided into
channels.
A specific frequency/channel is assigned to each
TV station.
Certain frequency ranges are specified as special
channels (hyperband channels).
6.
6.
Select 'CHANNEL' with
and confirm with
desired channel with
When a channel is found,it will stop searching. If
this is the channel you want, press
you set ' SKIP ' on for a channel, this channel will
be ignored when going through the channels
with
or
PROG P+
PROG P–
To search for other TV channels, begin again at
step 4.
I don't know the channels for my TV stations
In this case, press
PLAY B-K
NEL' to start the automatic channel search. A
changing channel number will appear on the TV
screen. Continue the automatic search until you
have found the desired TV channel.
7.
7.
To end, press
STATUS/EXIT
PLAY B-K
.
FWD 1- B
PLAY B-K
.
FWD 1- B
PLAY B-K
STOP C-L
P55
055
[OFF]
[OFF]
, select the
or
0..9
PLAY B-K
STOP C-L
. Then enter the
FWD 1- B
.
0..9
FWD 1- B
.
in 'CHAN-
STOP C-L
.
Using the satellite receiver
You can receive channels from the satellite
receiver via the scart socket
To do this, select the channel number 'AV1' by
pressing 0,0,1, with the keys
control.You will have to select the channel you
want to receive on the satellite receiver itself.
Automatic Tuning
During installation, all available TV channels are
. Then
searched for and saved. If the channel assign-
ments of your cable or satellite TV provider
change or if you are reinstalling the TV-Video
Combi, e.g. after moving house, you can start
this procedure again. This will replace the TV
channels already saved with the new ones.
1.Press
1.
2.Select 'TUNER SET UP' with
2.
STOP C-L
3.Select 'AUTO TUNING' with
3.
STOP C-L
4.The automatic TV channel search starts. This
4.
allows the TV-Video Combi to save all avail-
able TV channels. This procedure may take
,
several minutes.
5.When the TV channel search is complete,
5.
'AUTO TUNING COMPLETED' will briefly
appear on the TV screen.
. If
7
AV1/EXT1
0..9
. The main menu will appear.
MENU
and confirm with
, and confirm with
PLEASE WAIT
START
.
on the remote
PLAY B-K
.
FWD 1- B
PLAY B-K
.
FWD 1- B
FINISH
EN