Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer Benutzerhandbuch - Seite 19

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Software Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer herunter. Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer 28 Seiten. User guide - remote configuration manager
Auch für Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer: Spezifikationen (2 seiten), Firmware aktualisieren (1 seiten), Benutzerhandbuch (15 seiten)

Seite drucken
Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer Benutzerhandbuch
Setting
Options (default in bold)
Software
ESC/P,
0 slash
Off, On
I/F (Interface) mode
Auto, Parallel, Serial, USB, Optional
Auto I/F (Interface) wait time
10 seconds, 30 seconds
Parallel I/F bi-directional mode
Off, On
Packet mode
Auto, Off
Serial baud rate
19200 BPS, 9600 BPS, 4800 BPS, 2400 BPS,
1200 BPS, 600 BPS, 300 BPS
Serial parity
None, Odd, Even, Ignore
Serial data length
8-bit, 7-bit
Character table
Standard version: PC437, PC850, PC860, PC863,
PC865, PC861, BRASCII, Abicomp, Roman8, ISO
Latin 1, PC858, ISO 8859-15, Italic U.S.A., Italic
France, Italic Germany, Italic U.K., Italic Denmark 1,
Italic Sweden, Italic Italy, Italic Spain 1
NLSP version: PC437, PC850, PC860, PC863, PC865,
PC861, BRASCII, Abicomp, Roman8, ISO Latin 1,
PC858, ISO 8859-15, PC437 Greek, PC853, PC855,
PC852, PC857, PC866, PC869, MAZOWIA, Code
MJK, ISO 8859-7, ISO Latin 1T, Bulgaria, PC774,
Estonia, ISO 8859-2, PC866 LAT., PC866 UKR, PC
APTEC, PC708, PC720, PCAR864, PC771, PC437
Slovenia, PC MC, PC1250, PC1251, Italic U.S.A.,
Italic France, Italic Germany, Italic U.K., Italic
Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1
*1
Auto CR (IBM PPDS)
Off, On
IBM character table (IBM
Table 2, Table 1
*1
PPDS)
Buzzer
Off, On
Low-noise mode
Off, On
*2
Auto cut mode
Off, On
*2
Auto cut/back mode
Off, On
Overlapping multipart forms
Off, On
Continuous forms with labels
Off, On
Skip over binding
Off, On
*3
Get IP address
Panel, Auto, PING
*4
IP address
000.000.000.000 to 255.255.255.255
®
IBM PPDS
Setting
Options (default in bold)
*3
Subnet mask
000.000.000.000 to 255.255.255.255
*3
Default gateway
000.000.000.000 to 255.255.255.255
*5
Save settings?
Yes, No
*1 This setting is available only in IBM PPDS emulation mode.
*2 This setting is available only when the optional perforation cutter (#C81570X) is installed.
*3 These settings are available only when the optional Print Server is installed.
*4 This setting is available only when the optional Print Server is installed and the Get IP address setting is
set to Panel or PING.
*5 This menu appears when you press the Menu buttons (Tear Off and Top of Form) in SelecType mode.
Follow these steps to enter SelecType mode and change the settings:
1.
Make sure paper is loaded and the printer is on.
2.
Press the
buttons (
Menu
Tear Off
mode. The LCD displays the currently selected language.
3.
If you want a different language, press the
(
) button until you see the language you want.
Top of Form
4.
Press the
D (
) button to set the desired language.
Item
Pitch
5.
You see
on the LCD. Press the
Print Settings
print the current settings.
6.
Press the
(
) or
D (
ItemU
Font
Item
want to change.
Note:
You can scroll the menu settings by holding down the
(
) button for a few seconds.
Pitch
7.
Press the
U (
) or
Set
Tear Off
Set
the options available for the current setting until you see the one you want.
Note:
You can scroll the options by holding down the
(
) button for a few seconds.
Top of Form
8.
When you finish making settings, press and hold down the
(
and
). The LCD displays
Tear Off
Top of Form
and
) to enter the SelecType
Top of Form
U (
) or
Set
Tear Off
Set
D
D (
) button to
Set
Top of Form
) button to select the setting you
Pitch
U (
) or
Item
Font
Item
D (
) button to scroll through
Top of Form
U (
) or
Set
Tear Off
Set
D
buttons
Menu
.
Save Setting
Using SelecType Mode 19
D