Using the control functions
Switches the input source to USB Display.
Switch source
*
USB Display
Switches the video input source to the external
Switch source
*
equipment connected via a USB (Type A) port
USB1
or USB1.
Switches the video input source to the external
Switch source
*
USB2
equipment connected via a USB2 port.
Switch source
Switches the video input source to the image
*
LAN
projected by the computer via a network.
*
If the button does not function, you can switch the input source using the
button.
• Some connected projectors may not be equipped with all of the
q
above ports or functions. If you click a button for a port or
function that is not available, nothing will happen.
• You can select objects to be controlled and use the control
buttons to carry out control operations even when the following
are being displayed.
Group properties s
Projector properties s
Warning and Error Projector list
(Control operations can only be carried out for projectors with a
warning status.) s
Carrying out control using a web browser (Web
control)
You can use the computer's web browser to change the configuration
menu settings for projectors.
p.27
p.27
p.24
Procedure
A
Right-click on the icon of a projector to be controlled in
Grouping view or Detail list view and select "Web control".
B
The web browser will open and the Web control window
will be displayed.
Web control lets you set the same details as the configuration menu for
the projector.
Projector's User's Guide
s
You can select projectors and right-click on them to select Web
q
control even when the following are being displayed.
Group properties s
Warning and Error Projector list (Control operations can only be
carried out for projectors with a warning status.) s
Carrying out control using timer settings
This is useful for carrying out certain control operations such as
turning a projector's power on and off at specified times every day or
every week.
Timer settings can be carried out either for a single projector only, or
all at once for all projectors in a group.
Procedure
Select "Timer" - "Timer Settings" from the Tool menu.
The following window will be displayed and you can then check the
timer setting status.
p.27
p.24
30
Seite drucken