Epson FX-1180 - Impact Printer Kurzanleitung - Seite 26

Blättern Sie online oder laden Sie pdf Kurzanleitung für Software Epson FX-1180 - Impact Printer herunter. Epson FX-1180 - Impact Printer 33 Seiten. Epson serial impact dot matrix printers
Auch für Epson FX-1180 - Impact Printer: Setup-Handbuch (33 seiten), Broschüre & Specs (24 seiten), Informationen zum Produkt (17 seiten), Kurzreferenz-Handbuch (16 seiten), Handbuch (11 seiten), Spezifikation (2 seiten), Handbuch (18 seiten), Spezifikationen (2 seiten), Eingeschränkte Garantie (1 seiten), Referenzhandbuch (34 seiten)

Switching to printing on

continuous paper

Follow these steps to switch from printing

on single sheets to printing on continuous

paper with a push tractor:

Note:

To switch from printing with the optional front

sheet guide to printing with the front push

tractor, you need to remove the front sheet guide.

1. If a single sheet remains in the printer,

press the Load/Eject button to eject it.

2. Make sure that the tractor is installed in

the front or rear push position and that

continuous paper is loaded on it.

3. Set the paper release lever to the front or

rear push position, depending on the

tractor position you are using.

Your printer loads the continuous paper

automatically when you begin printing.

Downloaded from:

http://www.usersmanualguide.com/

Caution:

Never use the knob to eject paper; this

may damage the printer or cause it to

lose the top-of-form position.

EPSON FX-880+/FX-1180+ Quick Guide

Paper-Type Switching (2/2)