Epson FX-1180 - Impact Printer Kurzanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Kurzanleitung für Software Epson FX-1180 - Impact Printer herunter. Epson FX-1180 - Impact Printer 33 Seiten. Epson serial impact dot matrix printers
Auch für Epson FX-1180 - Impact Printer: Setup-Handbuch (33 seiten), Broschüre & Specs (24 seiten), Informationen zum Produkt (17 seiten), Kurzreferenz-Handbuch (16 seiten), Handbuch (11 seiten), Spezifikation (2 seiten), Handbuch (18 seiten), Spezifikationen (2 seiten), Eingeschränkte Garantie (1 seiten), Referenzhandbuch (34 seiten)

Seite drucken
Epson FX-1180 - Impact Printer Kurzanleitung
Default Settings
The default settings control many printer
functions. While you can often set these
functions through your software or printer
driver, you may sometimes need to change
a default setting from the printer's control
panel using the default-setting mode.
For a detailed description of the settings you
can change in the default-setting mode, see
"Understanding default settings." For
instructions on changing the settings, see
"Changing default settings."

Understanding default settings

This section describes the settings and
options available in the default-setting
mode. These settings are shown in the
following table and explained in detail after
the table.
To access and change a setting, see
"Changing default settings."

Default-setting mode

Setting
Skip over
perforation
Auto tear-off
Auto line feed
Print direction
Software
I/F (interface)
mode
Auto I/F
(interface) wait
time
Parallel I/F
bidirectional
mode
Downloaded from:
http://www.usersmanualguide.com/
Options
Off, On
Off, On
Off, On
Bi-D, Uni-D
ESC/P, IBM PPDS
Auto, Parallel, USB,
Option
10 seconds, 30 seconds
Off, On
EPSON FX-880+/FX-1180+ Quick Guide
Setting
Packet mode
0 slash
Buzzer
Auto CR
(carriage return)*
IBM character
table*
Page length for
front tractor
Page length for
rear tractor
Character table
International
character set for
italic table**
* This setting is available only in IBM PPDS emulation
mode.
** The options available for this setting vary
depending on the country.
Options
Off, Auto
/
0,
0
(the zerocharacter
with a slash)
Off, On
Off, On
Table 2, Table1
Length in inches: 3, 3.5, 4,
5.5, 6, 7, 8, 8.5, 11, 70/6,
12, 14, 17
Length in inches: 3, 3.5, 4,
5.5, 6, 7, 8, 8.5, 11, 70/6,
12, 14, 17
Standard model: italic,
PC 437, PC 850, PC 860,
PC 863, PC 865, PC 861,
BRASCII, Abicomp,
Roman 8, ISO Latin 1,
PC858, ISO8859-15
All other models: Italic,
PC 437, PC 850, PC 437
Greek, PC 853, PC855,
PC 852, PC 857, PC 866,
PC 869, MAZOWIA, Code
MJK, ISO 8859-7, Bulgaria,
PC 774, Estonia, PC 866
LAT., ISO 8859-2, PC
866 UKR, PC-APTEC,
PC-771, PC-AR864,
PC708, PC720
Italic U.S.A., Italic France,
Italic Germany, Italic
U.K., Italic Denmark 1,
Italic Sweden, Italic Italy,
Italic Spain 1
Default Settings (1/4)