Epson FX-2190 Benutzerhandbuch - Seite 21

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Software Epson FX-2190 herunter. Epson FX-2190 48 Seiten. Impact printers
Auch für Epson FX-2190: Spezifikationen (2 seiten), Handbuch (11 seiten), Setup-Handbuch (2 seiten), Produktinformation Handbuch (19 seiten), Spezifikationen (2 seiten), Kurzreferenz (12 seiten), Hier beginnen (2 seiten)

If the first line on your page appears too high or low, you can change its

position using the Micro Adjust function as described on page 32.

Caution:

Never use the knob to adjust the top-of-form position; this may damage the

printer or cause it to lose the top-of-form position.

Loading Continuous Paper with the

Rear Push Tractor

Make sure the printer is turned off, the tractor is installed in the rear

push position, and the paper guide is removed. (You may need to

move the tractor from the front push or pull position.)

Set the paper release lever to the rear push tractor position.

Release the left and right

sprockets by pulling the

blue sprocket lock levers

forward.

Slide the left sprocket

approximately 0.5 inch

(12 mm) from the far

left position and push

the blue lever back to

lock it in place. Then

slide the right sprocket

to match the width of

your paper, but do not

lock it.

The triangle mark on top of the printer indicates the point furthest to

the left where printing can begin.

Paper Handling