ECI 1000-U LCD Installationshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Installationshandbuch für Controller ECI 1000-U LCD herunter. ECI 1000-U LCD 18 Seiten.

6.3 User Interface

Run/Test – Two position switch. In RUN position the door board is controlled through the

controller interface. In the TEST position door operation is controlled through the

OPEN/CLOSE switch.

OPEN/CLOSE – 3 position switch. Middle position if off. With the RUN/TEST switch in the

TEST position door operation can be controlled with this switch.

NUDGE/LOCK – 3 position switch. Middle position if is off. With the RUN/TEST switch in

the TEST position both NUDGE and LOCK are controlled through this switch.

+ button – Used to move curser up or increase speed settings

- button – Used to move curser down or decrease speed settings

ENTER - Used to select menu options or enter parameter settings

ESC – Used to exit menu or go to previous menu

CL – On when CAM is on CL switch

DO17 - On when CAM in on CL switch

OL - On when CAM in on OL switch

OSDL - On when CAM in on OSDL switch

PL – On when CAM in on the PL switch

CLX – On when CAM in off the CLX switch

OLX – On when the CAM is off the OLX switch

SS – On when the CAM is on the SS switch

HDCSDL – On when cam is on switch

DO4 – On when DO4 present

DO7 – On when DO7 present

DO18 – On when DO18 present

6.3.4

ECI 1000-U LCD Installation Manual

ECI Model 1000N

Edit parameters

Load defaults

Diagnostics

Technical support

Figure 1 - Main Menu

Electronic Controls, Inc.

7073 North Atlantic Ave. Cape Canaveral, FL 32920

800-633-9788

www.eciamerica.com

P a g e

| 9