Epson LQ-860 - Impact Printer Produkt-Support-Bulletin - Seite 16

Blättern Sie online oder laden Sie pdf Produkt-Support-Bulletin für Software Epson LQ-860 - Impact Printer herunter. Epson LQ-860 - Impact Printer 25 Seiten. For microsoft windows 3.0 and 3.1
Auch für Epson LQ-860 - Impact Printer: Produkt-Support-Bulletin (20 seiten), Produkt-Support-Bulletin (5 seiten), Technischer Brief (7 seiten), Informationen zum Produkt (8 seiten), Produkt-Support-Bulletin (14 seiten), Produkt-Support-Bulletin (16 seiten), Produkt-Support-Bulletin (18 seiten), Produkt-Support-Bulletin (4 seiten), Produkt-Support-Bulletin (7 seiten), Produkt-Support-Bulletin (6 seiten), Produkt-Support-Bulletin (22 seiten), Spezifikationen (8 seiten), Produkt-Support-Bulletin (11 seiten)

Seite drucken
Epson LQ-860 - Impact Printer Produkt-Support-Bulletin
I I . Q. How much memory comes standard with the EPL-7500 and how can this
amount be increased?
A. The EPL-7500 comes standard with 2Mb of memory. The amount of
memory can be either doubled or tripled through the use of an optional
2Mb or 4Mb memory board.
12. Q. Can the amount of memory on either the 2Mb or 4Mb memory board be
increased?
A. No.
13.
Q. How do I run a SELF-TEST on the EPL-7500?
A. The EPL-7500 provides one (1) built-in SELF-TEST. Listed below are the
keystrokes necessary to initiate the SELF-TEST.
1.
Press the ON LINE button to enter the off-line condition.
2.
Press the SelecType button twice to enter the LEVEL 2 settings.
3.
Press the down arrow until "MISCELLANEOUS" is displayed.
4.
Press the right arrow to enter the miscellaneous settings.
5.
Press the down arrow until "TEST PRINT" is displayed.
6.
Press the right arrow to execute the test print.
7.
After the page prints, press the ON LINE button to return the
printer to an on-line condition.
14.
Q. How do I set the EPL-7500 Level 1 and 2 settings back to the factory-
default settings using the SelecType buttons on the printer's front panel?
A.
1.
Press the ON LINE button to enter the off-line condition.
2.
Press the SelecType button twice to enter the LEVEL 2 settings.
3.
Press the down arrow until 'MISCELLANEOUS' is displayed.
4.
Press the right arrow to enter the miscellaneous settings.
Press the down arrow until "FACTORY RESET" is displayed.
5.
Press the right arrow to enter the factory reset selection.
6.
Press the down arrow to select either "LETTER" or "A4". This
7.
selection will determine the factory default setting for PAPER STD
TRAY and PAPERSIZE OPT TRAY in SelecType Level 1.
Press the right arrow to execute the reset condition.
8.
Press the ON LINE button to return the printer to an on-line
9.
condition.
PSB No: P-00728
Page: 4 of 11