Epson LQ-860 - Impact Printer Produkt-Support-Bulletin - Seite 7

Blättern Sie online oder laden Sie pdf Produkt-Support-Bulletin für Software Epson LQ-860 - Impact Printer herunter. Epson LQ-860 - Impact Printer 25 Seiten. For microsoft windows 3.0 and 3.1
Auch für Epson LQ-860 - Impact Printer: Produkt-Support-Bulletin (20 seiten), Produkt-Support-Bulletin (5 seiten), Technischer Brief (7 seiten), Informationen zum Produkt (8 seiten), Produkt-Support-Bulletin (14 seiten), Produkt-Support-Bulletin (16 seiten), Produkt-Support-Bulletin (18 seiten), Produkt-Support-Bulletin (4 seiten), Produkt-Support-Bulletin (7 seiten), Produkt-Support-Bulletin (6 seiten), Produkt-Support-Bulletin (22 seiten), Spezifikationen (8 seiten), Produkt-Support-Bulletin (11 seiten)

Epson LQ-860 - Impact Printer Produkt-Support-Bulletin
EPL-7000 cont.
[E] REMOVE CARD
You may have inserted a font card or cartridge while the printer was on line or
while the FEED light was on. Data still remains in the printer's buffer.
[E] RESELECT TRAY
The optional lower paper cassette is not installed and the INPUT option is set
to OPT or AUTO.
[S] RESET
The printer is being reset to the previous settings in the macro specified with
LOAD MACRO option in SelecType Level 1.
[S] ROM Check
The printer is checking ROM.
[E] SAVE MEMORY OVERFLOW
If this message appears when you are trying to save a macro with the SAVE
MACRO option in SelecType Level 1, the printer does not have enough
memory to save any additional macros
[E] SERVICE REQ. CXXX
A controller error has been detected.
[E] SERVICE REQ. EOOXX
A print engine error has been detected.
XX= 03 Fusing Unit (low temp)
[E] SET FULL PRINT
This message may appear when you are trying to print graphics or a mix of
text and graphics.
[S] STANDBY MODE
When both CH P and CH S remain off for about thirty minutes, the printer
enters standby mode and this message appears.
[E] STARTUP ERROR
If this message appears when you turn on the printer, the power may have
been turned off while the printer was performing a save or reset operation.
04 Main Drive Motor
05 Ozone Fan motor
06 Polygon Mirror Drive
09 HSync Signal
PSB No: P-0077
Page: 6 of 11