Dimplex 6910470200 Service-Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Service-Handbuch für Innenkamin Dimplex 6910470200 herunter. Dimplex 6910470200 17 Seiten.

Heater Assembly Replacement

Tools Required: Phillips Head Screwdriver

Side Cutters

Pliers

1. Follow the instructions for Preparing the Firebox for Service on page 6.

2. Remove the center rail (number of screws will vary by model.)

3. Remove the 4 screws that hold the electronics cover panel.

4. Remove the 2 screws on each heater assembly bracket (4 screws total).

5. Trace the 4 wires from the defective heater assembly to the relay board. Disconnect the wiring connections, making

note of their original locations. Cut any restrictive wire ties.

6. Position the new heater assembly and secure it using the brackets and screws previously removed.

7. Connect the wires from the new heater assembly to their correct locations on the relay board.

8. Reassemble the fireplace.

Figure 5

Figure 6

(Figure 5)

(Figure 6)

Electronics

Cover Panel

Center Rail