Dimplex Amesbury AME20 Installations- und Betriebsanleitung - Seite 2
Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Innenkamin Dimplex Amesbury AME20 herunter. Dimplex Amesbury AME20 2 Seiten. Fuel effect fire basket inset fire
Seite drucken•
If the supply cord is damaged it must be replaced by the
manufacturer or service agent or a similarly qualified
person in order to avoid a hazard.
•
Although this heater complies with safety standards, we
do not recommend its use on deep pile carpets or on
long hair type of rugs.
•
The appliance must be positioned so that the plug is
accessible.
Operation
The Fuel Effect may be enjoyed whether or not the heating
elements are in operation. The fire has a grate flap fitted
which conceals the heating unit when not required. When
heat is required lift and secure on clip.
Controls
Two switches provide the Fuel Effect and a choice of heat
settings. A switch is in the "ON" position when the red
indicator mark on the switch is visible.
Switch 1 -Controls the electricity supply
to the heater and the Fuel
Effect.
Note: This switch must be ON
for the heater to operate.
Switch 2 -Provides heat selection.
1kW heat is provided when
grate flap is raised.
2kW is provided when switch is 'ON'.
Maintenance
WARNING – BEFORE UNDERTAKING ANY
MAINTENANCE OR CLEANING REMOVE PLUG OR
DISCONNECT FROM ELECTRICITY SUPPLY.
The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility
(EMC) EN55014, N60555-2 and EN60555-3 which cover the essential requirements of EEC Directives 73/23 and 89/336
Glen Dimplex UK Limited
Millbrook House
Grange Drive
Hedge End
Southampton
Hampshire
SO30 2DF
Lamp Replacement
Lift the fuel effect from the basket. The lamps are located
beneath
Grip the defective lamp near its center and carefully rotate
the lamp anticlockwise
Replace the lamp with 240V, 40 watt E14 SES clear candle
lamp, rotating the lamp clockwise
fully home. Do not overtighten
Reassemble in reverse order.
Safety cut-out
A thermal safety cut-out is incorporated in the heater to
prevent damage due to overheating. This can happen if the
heat outlet were restricted in anyway. If the cut-out operates,
unplug the heater from the socket outlet and allow
approximately 10 minutes before reconnecting.
Before switching the heater back on, remove any
obstructions that may be restricting the heat outlet, then
continue normal operation.
Should the cut-out continue to operate repeatedly, switch the
appliance off and seek service advice.
Cleaning
Before commencing cleaning, unplug the heater and allow it
to cool.
The surfaces of the heater should be given an occasional
wipe over with a soft damp cloth. Do not use detergents,
abrasive cleaning powder or polish on the metal body of the
heater.
Fig.2
The glass screen should be cleaned carefully with a leather.
DO NOT use proprietory glass cleaners.
To remove any accumulation of dust or fluff the soft brush
attachment of a vacuum cleaner should occasionally be used
to clean the outlet grille of the fan heater.
To clean the fuel effect, remove and wash in warm water.
Clean with a damp cloth. Replace when dry.
After Sales Service
Your product is guaranteed for one year from the date of
purchase. We undertake to exchange or repair free of charge
within this period, any part (excluding lamps) found to be
defective due to manufacturing fault.
Should you require after sales service, please get in touch
with the supplier through whom you purchased the
appliance.
Please do not initially return a faulty appliance or part of an
appliance to us as this may result in transit damage and/or
delay in providing service. Let us know your difficulty quoting
the model number and series letter of the appliance. We will
then take the appropriate action.
UK customer help line (8.00AM – 6.00PM Mon-Fri; 8.30AM-1.00PM Sat)
Customer Services:
Tel.
0870 7270101
Fax. 0870 7270102
Republic of Ireland
01. 8424833
until it comes out of its holder.
in the holder until it is
T9905/009/B