Dimplex BF362SD Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Innenkamin Dimplex BF362SD herunter. Dimplex BF362SD 12 Seiten.
Auch für Dimplex BF362SD: Service-Handbuch (13 seiten), Benutzerhandbuch (14 seiten)

Seite drucken

GE 60BC or Philips 60CTC.

Do not exceed 60 Watts per bulb.

Tool Requirements: Slot Screw Driver

To access the light bulb area:

FIGURE 4

Screws

FIGURE 5

Back

Ledge

Rear

Tab

Side Section

ledge (FIGURE 5) and the logs are resting against mirror.

8. Replace log bracket using two screws previously removed.

Mirror Cleaning

The mirror is cleaned in the factory during the assembly operation.

During shipment, installation, handling, etc., the mirror surface may

collect dust particles; these can be removed by buffing lightly with a

clean dry cloth.

1. Open steel curtain (remove

2. Remove two screws on log

3. Pull rear edge of ember bed up

Log

4. Examine the bulbs to determine

Ember

bed

5. Unscrew bulbs counter

Front

6. Insert new bulbs.

Edge

7. Replace the log by inserting

glass doors if applicable). The

bulbs can be accessed from

either side of the fireplace.

bracket and remove log plate

(FIGURE 4).

and forward by grasping ember

bed by the sides (handle the

logset only by the emberbed

and not the logs) and pulling

solidly until the rear tab pops

out from under the back ledge,

then lift out. (FIGURE 5)

which bulbs require

replacement.

clockwise.

front edge and under back