Dimplex BFSL33 Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für Innenkamin Dimplex BFSL33 herunter. Dimplex BFSL33 19 Seiten. Fireplace
Auch für Dimplex BFSL33: Benutzerhandbuch (14 seiten), Service-Handbuch (19 seiten), Benutzerhandbuch (13 seiten)

Seite drucken

MOUNTING FLANGES

NOTE: The trim should be in-

stalled before securing the firebox in

the opening.

There are two mounting flanges

located on each side of the fireplace

insert.

From the inside of the unit, bend tabs

outward and mount to the inside of

the framing using suitable hardware.

SECTION B: GENERAL ELECTRICAL INFORMATION

RECOMMENDED POWER SUPPLY WIRE SPECIFICATIONS

•

For 120V installations

ground wire (3 wires total) for the incoming power supply on fireplace in-

serts. Use the appropriate wire to meet local and national electrical codes

for rated power consumption.

•

For 208V / 240V installations

cable with ground wire (4 wires total) for the incoming power supply on

fireplace inserts. Use the appropriate wire to meet local and national elec-

trical codes for rated power consumption.

Two conductor, non-metallic sheath cable with ground wire (3 wires total) is

recommended for installation of a wall mounted thermostat and/or wall switch

for use on fireplace inserts. Use appropriate wire to meet local and national

electrical codes for rated power consumption. All wire gauges should match

the recommended wire sizes shown below.

120 Volts

208 Volts

240 Volts

use two conductor, non-metallic sheath cable with

Voltage

Figure 3

use three conductor, non-metallic sheath

Wire Gauge

12 Gauge

Fuse Rating

15 Amp

Mounting

Flanges