Epson PowerLite 1825 Betriebshandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Software Epson PowerLite 1825 herunter. Epson PowerLite 1825 36 Seiten. Release of check tool for network projectors v1.00 for windows
Auch für Epson PowerLite 1825: Benutzerhandbuch (42 seiten), Schnelles Einrichten (2 seiten), Betriebshandbuch (47 seiten), Konformitätserklärung (4 seiten), Benutzerhandbuch (14 seiten), Produkt-Spezifikation (2 seiten), Teileliste (1 seiten), Produkt-Support-Bulletin (25 seiten), Produkt-Support-Bulletin (38 seiten), Produkt-Support-Bulletin (12 seiten), Produkt-Support-Bulletin (42 seiten), Produkt-Support-Bulletin (22 seiten), Produkt-Support-Bulletin (28 seiten), Produkt-Support-Bulletin (41 seiten), Produkt-Support-Bulletin (34 seiten), Produkt-Support-Bulletin (38 seiten), Produkt-Support-Bulletin (28 seiten), Produkt-Support-Bulletin (15 seiten), Produkt-Support-Bulletin (22 seiten)

Seite drucken

Registering and deleting projectors for monitoring

PROCEDURE

Right-click in "Grouping view" and select "New" -

"Group".

The following window will be displayed.

Make the necessary settings while referring to the table below.

• If "Detail list view" is displayed, select "New" - "Group" from the

"Edit" menu.

Group name

Enter the name of the group(s) to be displayed in

"Grouping view" or "Detail list view".

Up to a maximum of 32 bytes can be entered.

A space cannot be used as the first character.

Display icon

Select the icon(s) to be displayed in "Grouping view"

or "Detail list view".

Parent group

This selects the parent group. If no groups have been

created, this cannot be selected.

Monitor

Select this to monitor all projectors that have been

registered in the group. If this is not selected, the

settings made when the individual projectors were

registered will be used.

It cannot be set when creating a new group.

TIP

You can also carry out this operation by selecting "Group" from

"New" in the "Edit" menu.

After entering the details, click [Register] to start the

registration. When the message is displayed, click

[OK].

The icon(s) of the projector(s) you registered will be displayed

in "Grouping view" or "Detail list view".

Right-click the projector icon(s) to register to the

group you have created in "Grouping view" or "Detail

list view", and select "Edit".

TIP

You can also carry out this operation by selecting "Edit" from the

"Edit" menu.

In the "Edit projector" window, select the group name

to use for registering in "Parent group" and then click

[Change].

The status of the group registration will be displayed as an icon

in "Grouping view" or "Detail list view".

TIP

The registration details can also be checked using "Projector list" in

the "View" menu.