Network configuration
If you need to configure the projector for your network, you can use the
projector's menu system.
1
Press the Menu button on the remote control, select the Network
menu, then press Enter.
2
Choose Network Configuration and press Enter.
3
Select the Wired LAN menu and press Enter.
4
Choose IP Settings and press Enter. You see a screen like the following:
5
Do one of the following:
•
If your network assigns addresses automatically, turn on the DHCP
setting.
•
If your network does not assign addresses automatically, turn off
DHCP and enter the projector's IP Address, Subnet Mask, and
Gateway Address, as needed.
To enter numbers, use the arrow buttons on the remote control to
highlight a number, then press the Enter button. When you're finished
entering an address, highlight Return, then press Enter.
6
To prevent the IP address from appearing on the network standby
screen, set the IP Address Display setting to Off.
7
When you're done, select Complete and press Enter to save your
settings. Then press Enter again to confirm.
8
Press the Menu button to exit the menu system.
Project over the network
Install EasyMP
Network Projection and Easy Management
®
(Windows only) on each computer that will project over the network. Use the
CD labeled Epson Projector Software for Meeting & Monitoring to install
these programs.
1
Press the LAN button on the remote control.
2
Start EasyMP Network Projection on your computer.
Windows: Select Start > Programs or All Programs > EPSON Projector
> EasyMP Network Projection.
Mac OS
X: Double-click the EasyMP Network Projection icon in your
®
Applications folder.
3
Select Advanced Connection Mode, then click OK.
4
Select the projector you want to connect to, then click Connect.
If you don't see the projector you want, click the Automatic search
button.
5
If you see a message asking for a keyword, enter the four digits that
appear on the LAN standby screen and click OK.
Your computer image is projected, with a floating toolbar:
When you're done presenting, click Disconnect on the toolbar.
NOTE: For more information about using and monitoring the projector on
a network, see your Network and PC Free Operation Guide and EasyMP
Monitor Operation Guide (Windows only). These guides are installed
along with your projector User's Guide and are viewable by clicking the
icons for them on your computer desktop.
EasyMP Monitor
®
Seite drucken