Epson PowerLite 480 Handbuch zur Schnelleinrichtung - Seite 2
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Software Epson PowerLite 480 herunter. Epson PowerLite 480 4 Seiten. Maintenance
Auch für Epson PowerLite 480: Handbuch zur Schnelleinrichtung (4 seiten), Betriebshandbuch (50 seiten), Konformitätserklärung (4 seiten), Spezifikationen (6 seiten), Installationshandbuch (4 seiten)
Seite drucken
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Turn projector
on and off
Access projector
menus
Change presentation
slides (USB only)
Turn off projector
display and sound
You can use the remote control to operate the projector. With the USB cable,
you can use the remote as a wireless mouse. For more information on using the
remote control, see your User's Guide on your projector CD.
Turn on your equipment
1
Turn on your computer or video source.
2
Make sure the power cord is connected and plugged into an
electrical outlet.
Power light
3
Press the
power button on the projector or remote control.
The
power light flashes green, then stays on.
Note: To shut down the projector, press the
4
If you don't see an image, press the Source Search button on the
remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
Choose which
source to display
Navigate projector
menus
Control projector
volume
Get solutions to
common problems
power button twice.
5
If you need to focus the image, first slide the switch to open the air filter
cover on the side of the projector. Then raise or lower the focus lever to
sharpen the image.
6
The default language of the menu system is English. To select another
language, press the Menu button on the remote control. Select
Extended and press
. Select Language and press
language and press
. Press the Menu button to exit the menu system.
Project over a wired
network
If you need to configure the projector for your network, see "Network
Configuration" on the back of this sheet.
1
Press the LAN button on the remote control. You see this screen.
2
®
Start EasyMP
Network Projection on your computer.
Windows: Select
or Start > Programs or All Programs > EPSON
Projector > EasyMP Network Projection.
Mac OS X: Double-click the EasyMP Network Projection icon in the
Applications folder.
3
Select Advanced Connection Mode and click OK.
4
Select the projector you want to connect to, then click Connect.
If you don't see the projector you want, click the Automatic search
button.
. Select your