ABB AS400 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Relais ABB AS400 herunter. ABB AS400 14 Seiten. Relay card

1.4.2.1 Connecting the Card

To connect the card to the computer and start the configuration:

1. Plug the RJ-45 end of the supplied serial cable into the Settings port on the card

2. Plug the other end of the serial cable into the serial COM port on the computer.

1.4.2.2 Configuration

To configure the card:

1. Verify that the serial cable (supplied) is connected to the card's Settings port and the computer's COM

port.

2. Open your terminal emulation program (such as HyperTerminal). If you do not have it in your

computer, you can download it from our website:

a. StartàAll ProgramsàAccessoriesàCommunicationsàHyper Terminal

b. Or type HYPERTRM in Windows OS Run Dialog

Figure 5: Card Installation

Figure 6: Card Connection

Figure 7: Hyperterminal path

Figure 8: Hyperterminal through command window

4NWP100446R0001_OPM_ABB_AS400RelayCardPowerValue_EN140226

Modifications reserved

http://www.newavenergy.com/files/hypertrm.zip

Page 9/15 ABB