Epson PowerLite 82c Spezifikationsblatt - Seite 6

Blättern Sie online oder laden Sie pdf Spezifikationsblatt für Software Epson PowerLite 82c herunter. Epson PowerLite 82c 15 Seiten. Projector
Auch für Epson PowerLite 82c: Benutzerhandbuch (42 seiten), Betriebshandbuch (47 seiten), Teileliste (1 seiten), Handbuch zur Schnelleinrichtung (7 seiten), Installationshandbuch (19 seiten), Produkt-Support-Bulletin (25 seiten), Produkt-Support-Bulletin (8 seiten), Produkt-Support-Bulletin (22 seiten), Produkt-Support-Bulletin (28 seiten), Konformitätserklärung (4 seiten), Produkt-Support-Bulletin (41 seiten), Produkt-Support-Bulletin (15 seiten), Produkt-Support-Bulletin (22 seiten), Spezifikationen (2 seiten), Spezifikationen (2 seiten)

Seite drucken
Epson PowerLite 82c Spezifikationsblatt
Epson PowerLite 62c/82c Projector

Turning Off the Projector

When you've finished using the projector, follow the
recommended procedure to shut it down.
Note:
When the projector has not received any input signals for 30
minutes, it automatically turns off the lamp and enters "sleep
mode." This conserves electricity, cools the projector, and extends the
life of the lamp. If you are done using the projector, unplug the
power cord. If you want to start projecting again, plug it in and
press the P
button. You can turn sleep mode on or off using
Power
the Extended menu.
1. If you're using a computer, shut it down first; otherwise you
may not be able to see your computer's display to shut it
down properly.
2. To turn off the projector, press the P
projector or remote control.
You see this confirmation message:
(If you don't want to turn it
off, press any other button
or wait a few seconds until
the message disappears.)
3. Press the P
button
Power
again. The projector beeps twice, the lamp is turned off, and
the
light turns orange.
Power
Note:
With Epson's exclusive Instant Off
down period, so you can pack up and go immediately after
turning off the projector.
If you want to turn the projector on again, press the
button.
Power
P
4. Press up on the blue foot release lever and lower the
projector to retract the front adjustable foot, as shown.
Foot
6
Epson PowerLite 62c/82c Projector
-
button on the
Power
™
technology there's no cool-
5. Turn off and disconnect any equipment plugged into the
projector.
Caution:
To avoid damaging the projector or lamp, never unplug the
power cord when the
6. Replace the lens cap and unplug the power cord.
7. If you won't be using the projector for a while, store it in the
soft case that came with it or in another protective case.

Selecting the Image Source

You can connect the projector to multiple video sources
simultaneously. Then use these buttons on the projector or
remote control to switch between them:
❏
Comp1
Press this button to move through the following sources:
(
Computer1
Auto
(
Component Video
❏
Comp2
Press this button to move through the following sources:
(
Computer2
Auto
(
Component Video
❏
S-Video
Press to select
S-Video
❏
Video
Press to select
Video.
You can also press the
control or projector until the correct image is projected.
After you select a source, the screen goes dark for a moment
before the image appears. The name of the source appears
briefly on the screen.
9/05
light is green or flashing orange.
Power
),
(
), and
Computer1
RGB
).
),
(
), and
Computer2
RGB
).
.
button on the remote
Source Search
Computer1
Computer2