Philips 105S63 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Monitor Philips 105S63 herunter. Philips 105S63 46 Seiten. Crt monitor

THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF

THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS

MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO

INPUT SIGNAL.

This monitor meets the Power Management standards as set by the Video

Electronics Standards Association (VESA) and/or the United States

Environmental Protection Agency (EPA) and The Swedish Confederation

Employees ( NUTEK ). This feature is designed to conserve electrical energy

by reducing power consumption when there is no video input signal present.

When there is no video input signal this monitor, following a time-out period,

will automatically switch to an OFF mode. This reduces the monitor's

internal power supply consumption. After the video input signal is restored,

full power is restored and the display is automatically redrawn. The

appearance is similar to a "Screen Saver" feature except the display is

completely off. The display is restored by pressing a key on the keyboard, or

clicking the mouse.

Plug and play

Plug & Play DDC1/2B Feature

This monitor is equipped with VESA DDC1/2B capabilities according to the

VESA DDC STANDARD. It allows the mon itor to inform the host system of

its identity and, depending on the level of DDC used, communicate

additional information about its display capabilities. The communication

channel is defined in two levels, DDC1 and DDC2B.

The DDC1 is a unidirectional data channel from the display to the host that

continuously transmits EDID information. The DDC2B is a bidirectional data

channel based on the I²C protocol. The host can request EDID information

over the DDC2B channel.

Video Cable Pin Assignments:

1. Red

2. Green

3. Blue

4. Ground

Philips_manual_

Tuesday, November 18, 2003 3:00:46 PM

5. Ground

9. NC

6. R-Ground

10. Ground

7. G-Ground

11. Monitor Ground

8. B-Ground

12. DDC-Serial Data

13. H-sync

14. V- sync / * VCLK

15. DDC-Serial Clock

* FOR DDC