Toshiba 19A26 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für TV Toshiba 19A26 herunter. Toshiba 19A26 15 Seiten. Toshiba 19a26 color television service manual
Auch für Toshiba 19A26: Benutzerhandbuch (29 seiten), Spezifikationen (2 seiten), Benutzerhandbuch (29 seiten), Service-Handbuch (34 seiten)

Seite drucken

1. Tv/Video Selection

ANTENNA/CABLE

TV CONNECTIONS

Choose one of the following seven connections,

based on your

equipment and service:

Combination VHF/UHF antenna

\ Single 75 ot/rn cable

*For best pertorrnance, if you havea splitter connected, rernovo

TRANSFORMER

the spfitter and connectthe single wire to the ttallstomTec

(riot supp(ied)

and then to the TV_ antenna

input

(as il/ustT:)ted

heTe)

Separate VHF and UHF antennas or

Combination VHF/UHFantenna with separate cables/wires

UHF Antenna

300 ohm twin-lead

wire

-c=_

ToANTklput

VHF Antenna

75 o5['13 c_able

COMBINER

(netsupplied}

(or)

UHF Antenna

300 ohm twin-lead wire

............................................................................................

_=_1_ I ToANTinput

VHFAntenna

IF _=m_L---_

300 ohm twin-lead wire*,._-.7_-._J ,_E_{,

(n0t supp(ied)

TRANSFORMER

(not s upplied)

Cable TV service

ToANfinput

(or)

To A NT input

on back ofTV

FromTvserviceCable

_CONVERTER/DESCRAMBLER

(or)

IIINIOONVERTER/DESCRAMBLERIINN

To_T_p_t

From cable

.........

TVservicem_[JSPLITTER

A BSWITCH _____rJmc:_

Combination

VHF/UHF antenna

(Single 75 ohm cable or 300

ohm twin-lead

wire)

Connect

the 75 ohm cable from a combination

VHF/UHF

antenna to the antenna jack.

If your combination

antenna has a 300 ohm twin-lead wire, use

the 300-75 ohm matching transformer

(not supplied).

Combination

VHF/UHF antenna

(Separate VHF and UHF 300

ohm twin-leads)

Connect the UHF twin-lead wire to a combiner

(not supplied).

Connect

the VHF twin-lead

to the 300-75

ohm

matching

transformer

(not supplied).

Attach

the transformer

to the

combiner. Attach the combiner to the antenna jack.

Separate

VHF/UHF antennas

Connect the 75 ohm cable from the VHF antenna and the UHF

antenna

twin-lead

to a combiner

(not supplied).

Attach the

combiner to the antenna jack.

NOTE: If your VHF antenna has a twin-lead wire, use the 300-75

ohm matching transformer (not supplied), then connect the trans-

former to the combiner.

For subscribers

to basic cable TV service

For basic cable service not requiring a converter/descrambler

box, connect the Cable TV 75 ohm coaxial cable directly to the

antenna jack on the back of the television.

For subscribers

to scrambled

cable TV service

If you subscribe to a cable service which requires the use of a

converter/descrambler

box, connect the incoming cable to the

converter/descrambler

box and connect the output of the box to

the antenna

jack on the back of the television.

Follow the

connections

shown left. Set the television

to the output of the

converter/descrambler

box (usually channel 3 or 4) and use the

converter/descrambler

box to select channels.

For subscribers

to unscrambled

basic cable with scrambled

premium

channels

If you subscribe to a cable service in which basic cable channels

are unscrambled

and premium

channels

require the use of a

converter/descrambler

box, you may wish to use a two-set signal

splitter (sometimes called a "two-set coupler") and an A/B switch

box from the cable installer or an electronics supply store. Follow

the connections shown left. With the switch in the "B" position, you

can directly tune any nenscrarnbled

channels on your TV. With

the switch in the "A" position, tune your TV to the output of the

converter/descrambler

box (usually channel 3 or 4) and use the

box to tune scrambled

channels.

This television has an extended tuning range and can tune most

cable channels without using a cable company supplied

converter box. Some cable companies offer "premium pay

channels" in which the signal is scrambled. Descrambling these

signals for normal viewing requires the use of a descrambler

device which is generally provided by the cable company.

CONNECTION

TO OTHER EQUIPMENT

The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features

of each component.

Check the owner's manual provided with each component

for the location of video and audio inputs and outputs.

The following

connection

diagrams are offered as suggestions.

You may need to modify them to accommodate

your particular

assortment

of components.

TV/VIDEO SELECTION

To view the picture from a VCR,

(

camcorder,

or TV game, you must put the

WDEO

TV in VIDEO mode first. Press TV/VIDEO

to select VIDEO mode. The word "VIDEO"

displays briefly on-screen.

Press TV/

VIDEO again to return to TV mode.

1. To connect

the TV to a VOR

VCR

Front of TV

_dio/

Video OUT

VIDEO _

AUDIO

(not supplied) (

The unauthorized

recording, use, distribution,

| revision of television

programs, videotapes,

DVDs, and

| other materials

is prohibited

under the Copyright

Laws

| of the United States and other countries,

and may

_minal

liability.

2. To connect

the TV to a VIDEO Game

The TV also can be used as a display device for many video

games. However, due to the wide variety of different types of

signal generated by these devices and subsequent hook-up

variations required, they have not all been included in the

suggested connection diagrams. You will need to consult each

component's owner's manual for additional information.

Front of TV

(not

supplied

To Audio/Video OUT _

3. To connect

the TV to a camcorder

To playback from the camcorder, connect the camcorder to

the Tvas

shown.

Front of TV

To_ack_

(notsupp_

3XOO121A(E)

P02-07

22/12/05,

4:15 PM