Toshiba 20A23 Benutzerhandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für TV Toshiba 20A23 herunter. Toshiba 20A23 16 Seiten. Toshiba portabler tv 20a23
Auch für Toshiba 20A23: Benutzerhandbuch (33 seiten), Service-Handbuch (33 seiten)
Seite drucken
USING THE LOCK MENU
The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME TIMER and CHANGE PASSWORD functions.
You can use these functions after entering the correct PASSWORD. (This password is the same one selected under "SETTING THE
V-CHIP" on page 10.)
LOCKING
CHANNELS
With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting.
You can choose to lock up to nine TV channels and nine cable channels.
]
Use the Channel Number Buttons
to
the
(0-9)
display
television channel you wish to lock.
]
Press MENU, then
SET + or-
until the indicator
press
next to "LOCK" begins to flash. Then press ENTER.
]
Use the Channel Number buttons (0-9) to enter your
password, then press ENTER.
The LOCK menu appears.
]
Press SET + or-
until the indicator next
to "CH LOCK" begins to flash, then
press ENTER.
]
Press SET + or-to
select:
• INPUT to select the channel as one to
be locked. Then press ENTER.
• ALL CLEAR to clear all channels from
the list of locked channels. Then press
ENTER,
\
,, LoCK
1
-
I CH LOCK
II_
VIDEO LOCK
I_/
_MET_'_ER
I CH_Ir_ PASSWORD
_ yENTERyMENU/
C_ LOCK
1
\
_* 4 _BIE
|ALL CLEAR
NTERIMENU)
]
Repeat steps 1 through 5 to lock other channels. When you
are finished locking channels, press MENU repeatedly until
the MENU screen is cleared.
If you try to tune a locked channel, the TV will not display it, but
will display the nearest unlocked channel.
NOTES:
• If you are accessing the LOCK menus or V-chip menus for the
first time, choose a four-digit number to be your password.
• After programming
CH LOCK, change channels before turning
off the television.
• If you want to unlock channels, select ALL CLEAR in step 5,
then press ENTER.
LOCKING
VIDEO
INPUT
With the VIDEO LOCK feature, you can lock out the input
source (VIDEO) and channel 3 and 4.
You will not be able to select the input sources with the TV/
VIDEO button or Channel buttons unless you clear the setting.
]
Press MENU, then press SET + or-
until the indicator
next to "LOCK" begins to flash, then press ENTER.
]
Use the Channel Number buttons (0-9) to enter your
password, then press ENTER. The LOCK menu appears.
]
Press SET + or-
until the indicator
V_)EO LOCK
next to "VIDEO LOCK" begins to flash,
• off
then press ENTER.
wEo
V©EO_
]
Press SET + or-to
select:
• OFF: Unlocks all video input sources.
• VIDEO: Locks VIDEO.
• VIDEO +: Locks VIDEO, channel 3 and channel 4.
This option should be used if you use the antenna
to play a video tape.
]
Press MENU to return to normal viewing.
NOTE:
After programming
VIDEO LOCK, change channels or activate
the TV/VIDEO key before turning off the television.
SETTING
THE GAME
TIMER
With the GAME TIMER feature, you can automatically activate
the VIDEO LOCK feature (VIDEO setting) to set a time limit for
playing a TV game (30, 60, 90, or 120 minutes).
]
Press MENU, then press SET + or - until the indicator next to
"LOCK" begins to flash, then press ENTER.
]
Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCK menu appears.
"GAME TIMER" begins to flash, then press
• o_
ENTER,
®
]
Press SET + or - to select a time limit
_=
(30 minutes, 60 minutes, 90 minutes, 120
<+l-la_l_,u>
minutes or OFF).
[]
Press MENU repeatedly until the MENU screen is cleared.
After the GAME TIMER is programmed,
the display will ap-
pear briefly every ten minutes to remind you that the GAME
TIMER is operating.
When the programmed
end time is
reached, the display will change the channel automatically.
TO SET THE ON TIMER
This feature allows you to program the TV to turn on automatically
at a set time and channel.
NOTE: After a power failure or disconnection
of the power, the timer setting will be lost.
]
PressMENU,
thenpressSET+or-
until
the indicator next to "ON TIMER" begins
to flash. Then press ENTER.
The ON TIMER menu appears.
I
ONT_MER
_1
1
HOUR
M_NUTE
CH@2
CANCEL
(+y_yENT_RY_E_}
]
Press SET + or-
to set the desired hour (0-12), then
press ENTER.
]
Press SET + or-
to set the desired minute
(00, 05, 10, ...55), then press ENTER.
oPsss
or osethde
...... 1
channel, then press ENTER.
HOUR_
_tlNbTE
-_5r_
...... y-
(+ y_ yEt_EIt yMENU)
]
PressSET÷or-toselecttheSETmede,
thenpressENTER.
]Press
MENU repeatedly
until the MENU
is cleared,
screen
NOTE:
To cancel the ON TIMER, select CANCEL in step 4 above. Press
MENU repeatedly until the MENU screen is cleared.
11