Basic Image Adjustments
Once the projector is turned on, use these functions to adjust
the image.
Selecting the Image Source
If you don't see the image you want, press the
on the remote control that corresponds to the port to which
your video equipment is connected. For example:
To select the image source
connected to the Video port . . .
Focusing and Zooming the Image
To adjust the sharpness or size of the image:
Note: Before starting, you may want to display a test pattern to
facilitate adjustment. Press the Pattern button on the remote
control, then select Cross-hatching.
1. Press the
or
Focus
Zoom
control.
You see this screen:
2. Use the
arrow buttons to adjust the image.
Note: If you use the remote control, you can stand close to the
screen while focusing the image. This lets you adjust the picture
more precisely.
3. Press
when done.
ESC
button
Source
. . . press the Video
button
button on the projector or remote
Epson PowerLite Cinema 500 Projector
Inverting and Mirroring the Image
If the image is upside-down or backwards, use the Projection
function to adjust it:
1. Press the
button on the remote control.
Menu
2. Use the menu navigation buttons to open the
then open the
Screen
3. Choose from these options:
❏
if the projector is located in front of the screen (for
Front
example, on a table).
❏
if the projector is located in front of the
Front/Ceiling
screen and mounted overhead.
❏
if the projector is located behind the screen.
Rear
❏
if the projector is located behind the screen
Rear/Ceiling
and mounted overhead.
Selecting the Input Signal
If you're using the projector's Input A or B port, select the
correct setting for the type of video equipment you've
connected to it:
1. Press the
button on the remote control.
Menu
2. Use the menu navigation buttons to open the
then open the
Input Signal
(depending on the port to which you've connected
Input B
your equipment).
3. Choose from these options:
❏
for a video player that outputs an NTSC signal.
YCbCr
❏
for a video player that outputs an HDTV signal.
YPbPr
❏
if your video player outputs an RGB video
RGB-Video
signal.
❏
if your image is coming from a computer.
RGB
Performing Keystone Correction
If the projected image looks like
function to correct its shape.
Note: If the image is shaped like
placed off to the side of the screen and angled toward it. Face the
projector straight ahead (instead of at the center of the screen), then
use the horizontal lens shift knob to center the image.
To perform keystone correction:
1. Press the
button on the remote control.
Menu
2. Use the menu navigation buttons to open the
then open the
Screen
3. Use the
arrow buttons to adjust the shape of the image.
4. Press the
button when done.
Menu
2/04
Epson PowerLite Cinema 500 Projector - 5
Setting
menu and select
Projection
Setting
menu and select
Input A
or
, use the Keystone
or
, the projector has been
Setting
menu and select
Keystone
menu,
.
menu,
or
menu,
.
Seite drucken