Toshiba DIGITAL Series Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Alles in einem Drucker Toshiba DIGITAL Series herunter. Toshiba DIGITAL Series 41 Seiten. Split type
Auch für Toshiba DIGITAL Series: Benutzerhandbuch (48 seiten), Benutzerhandbuch (45 seiten), Benutzerhandbuch (49 seiten), Benutzerhandbuch (50 seiten), Benutzerhandbuch (48 seiten), Benutzerhandbuch (4 seiten), Benutzerhandbuch (22 seiten), Hinweise zur Installation (4 seiten)

Toshiba DIGITAL Series Benutzerhandbuch
A wide variety of external equipment can be connected via the sockets located on the side and back of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the
Standby / On button
+/- control/volume buttons
Programme / Volume / AV Function

Switching on

Make sure that the mains plug is connected to the power
and the standby LED lights up in red. Press the
the left side of the television to switch the television on and
the standby LED turns green.
To put the television into Standby, press
control. To view the television, press
may take a while to appear.
For energy saving:
Turning the television into standby at its mains supply,
or un-plugging it, will cut energy use to nearly zero for all
televisions. This is recommended when the television is not
being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy
use.
Energy effi ciency cuts energy consumption and thus saves
money by reducing electricity bills.
Note: Putting the television into standby mode, will reduce
energy consumption, but will still draw some power.

Controlling the TV

left side of the television may be used for some functions.
button on
on the remote
again. The picture
English - 11 -
Timer LED
Standby LED
Remote Control Sensor

Using the Controls and Connections on the TV

Using the control buttons on the side of the TV:
• To alter the volume, press + or -. If the volume does not
change, press P/V-AV once and press + or - again.
• To alter the programme position, press + or -. If the
programme does not change, press P/V-AV once and
press + or - again.
• To select an external input, press and hold the P/V-AV
button until the "Input Source" list is displayed. To select
an external input, press P/V-AV repeatedly until the
appropriate input source is selected.
Please always refer to the owner's manual of the
equipment to be connected for full details.
Please note: Inserting the headphone plug will mute the
sound from all speakers.