Toshiba DIGITAL Series Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Alles in einem Drucker Toshiba DIGITAL Series herunter. Toshiba DIGITAL Series 41 Seiten. Split type
Auch für Toshiba DIGITAL Series: Benutzerhandbuch (48 seiten), Benutzerhandbuch (45 seiten), Benutzerhandbuch (49 seiten), Benutzerhandbuch (50 seiten), Benutzerhandbuch (48 seiten), Benutzerhandbuch (4 seiten), Benutzerhandbuch (22 seiten), Hinweise zur Installation (4 seiten)

Seite drucken

Important safety information (continued)

• Ensure that the unit is sufﬁ ciently ventilated! Never place

it next to or underneath curtains!

• This set should only be connected to a 220-240V AC

50Hz mains power supply. Do not attempt to connect it

to any other type of supply.

• The socket outlet must be installed near the equipment

and is easily accessible.

• Do not open this unit. An attempt to repair the unit by a

non-expert could be dangerous and potentially cause a

ﬁ re hazard. All repairs must be carried out by qualiﬁ ed

service personnel only.

• Keep away from rodents. Rodents (and also cockatiels)

enjoy biting electric ﬂ exes. They can cause a short

circuit (ﬁ re hazard!) and receive a fatal electric shock.

• Always hold the plug when disconnecting the unit from

the socket outlet. Do not pull on ﬂ ex. The ﬂ ex can

become overloaded and cause a short circuit.

• Use a soft, dry cloth to clean the unit.

• Set up unit so that no one will trip over the ﬂ ex.

• This unit is recommended to be installed on shock-free

benches in order to avoid any danger from falling.

• Take note that toddlers can pull the unit down from a

table or cupboard by means of its ﬂ ex. Children can hurt

themselves when doing this.

• Do not use the unit near heat sources. The casing and

ﬂ ex could be damaged by the intensity of the heat.

• The screen is made of glass and can break if damage is

done to it. Be careful when collecting sharp edged glass

splitters.

• If you intend to wall mount the unit, contact the shop

where you purchased the unit for advice, and leave the

installation work to professionals. Improper installation

can cause damage and/or injuries.

• When installing the set on a wall, allow at least 10 cm

clearance between the rear of the set and the wall.

Clearance of less than 10 cm will obstruct the vents and

cause overheating to the interior of the set, resulting in

faults or damage to the set.

• Taking fall-prevention measures

- If these measures are not taken, the unit can fall and

cause damage and/or injuries.

- Contact the shop where you purchased the unit to

obtain full details of the measures.

• When a TV stand is used,

- Ensure the unit is fully on the stand and placed in the

centre.

- Do not leave the stand doors open. You could be

hurt as a result of the unit falling or breaking, or

your ﬁ ngers being caught or jammed. Take extra

precautions if you have children.

• Avoid placing the unit on any surfaces that may be

subject to vibrations or shocks.

• To protect the unit during a thunder storm, unplug the

AC power cord and disconnect the aerial.

Caution: Do not touch the aerial connector.

• When you leave your home for a long period of time,

unplug the AC power cord for safety.

• The unit becomes warm when in operation. Do not place

any covers or blankets on the unit in order to prevent

overheating.

The ventilation holes should not be blocked. Do not set up

near radiators. Do not place in direct sunshine.

• When placing on a shelf, allow at least 10 cm clearance

space around the whole unit.

• The unit shall not be exposed to dripping or splashing,

and no objects ﬁ lled with liquids, such as vases, shall be

placed on the apparatus.

• Liquids spilled into the unit can cause serious damage.

Switch the set off and disconnect the mains power

supply, then consult a qualiﬁ ed service person before

attempting to use the unit again.

• Moisture condensation occurs, for example, when you

pour a cold drink into a glass on a warm day and drops

of water form on the outside of the glass. In the same

way, moisture may condense on this unit's internal

optical pick-up lens, one of the most crucial internal

parts of the unit.

• Moisture condensation occurs in the following situations:

- When you move the unit from a cold place to a warm

place.

- When you use the unit in a room where the heater

was just turned on.

- When you use the unit in an area where cold air from

an air conditioner directly hits the unit.

- When you use the unit in a humid place.

• Never use the unit when moisture condensation may

occur.

• Using the unit when moisture condensation exists may

damage its own internal parts and discs. Connect the

power cord of the unit to the wall outlet, turn on the unit,

remove the disc, and leave it for two or three hours.

After two or three hours, the unit will warm up and

moisture will be evaporated. Leaving the TV connected

to the wall outlet will help prevent moisture condensation

in the unit.

• Never place hot objects or open ﬂ ame sources, such

as lighted candles or night lights, on or close to the TV.

High temperatures can melt plastic and lead to ﬁ res.

English - 5 -