Epson Stylus Pro 7600 Handbuch zum Auspacken und Einrichten - Seite 19
Blättern Sie online oder laden Sie pdf Handbuch zum Auspacken und Einrichten für Software Epson Stylus Pro 7600 herunter. Epson Stylus Pro 7600 24 Seiten. W 24-inch-wide and 44-inch-wide photographic
printers with new seven-color ultrachrome ink system
Auch für Epson Stylus Pro 7600: Handbuch (5 seiten), Kurzreferenz-Handbuch (11 seiten)
Seite drucken
Using the built-in USB interface
To use the printer's built-in USB interface, you will
need a USB interface cable. Then follow the steps
below to connect the printer to your computer.
1. Make sure both the printer and computer are
turned off.
2. Plug the cable connector securely into the
printer's USB port.
3. Plug the other end of the cable into the
computer's USB port on the back of the
Macintosh.
Installing the Printer Software
For Windows
After connecting the printer to your computer,
you need to install the software included on the
"Printer Software for EPSON STYLUS PRO
7600/9600" CD-ROM shipped with your printer.
Printer software components
Your printer software includes the following
items:
Printer driver and utilities
The printer driver runs, or "drives," your printer;
use it to make settings such as print quality, speed,
media type, and paper size. The Nozzle Check,
Head Cleaning, and Print Head Alignment
utilities help you keep your printer in top
operating condition. EPSON Status Monitor 3 (for
Windows) or EPSON StatusMonitor (for
Macintosh) notifies you of printer errors and
display printer status information such as the
amount of ink remaining.
Printer Status Page utility (for Windows 2000
only)
The Printer Status Page utility (for Windows 2000
only) enables you to monitor the printer status and
network settings over the Internet when using the
Windows 2000 Internet Printing feature. To use
this utility, you must obtain an optional network
interface. See your network manual for more
information.
User Guides
The online Reference Guide helps you learn more
about your printer.
If you are using the floppy disk version of the
software, make a backup copy of the EPSON
printer software disk before you begin
installation. If you wish to make a floppy disk
version of the printer software on your CD-ROM,
you can use the driver disk creation utility
included on the CD-ROM.
Installing on Windows
Follow these steps to install your printer software:
Note:
If you wish to make a floppy disk version of the printer
software included on your CD-ROM, insert the printer
software CD-ROM, then double-click Create Floppy
based printer driver/utility disks and follow the
on-screen instructions.
1. Make sure that your printer is off.
2. Turn on your computer and start Windows. If
the New Hardware Found screen or any other
Wizard appears, click Cancel.
3. Insert the printer software CD-ROM shipped
with your printer in the CD-ROM drive. The
Installer dialog box appears.
17