Philips Signage Solutions BDL4252EL Benutzerhandbuch - Seite 17
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Monitor Philips Signage Solutions BDL4252EL herunter. Philips Signage Solutions BDL4252EL 43 Seiten. 42" edge led backlight full hd ops slot e-line display
Auch für Philips Signage Solutions BDL4252EL: Kurzanleitung (3 seiten), Spezifikationen (3 seiten)
Seite drucken
BDL4252EL
2.
Parts and Functions
2.1.
Control Panel
POWER button
1
Use this button to turn the display on or put the display to standby.
MUTE button
2
Switch the audio mute ON/OFF.
INPUT button
3
• Use this button to select the input source.
[ ] button
4
Increase the adjustment while OSD menu is on, or increase the
audio output level while OSD menu is off.
• Used as [SET] button in the On-Screen-Display menu,
[ ] button
5
Decrease the adjustment while OSD menu is on, or decrease the
audio output level while OSD menu is off.
[ ] button
6
Move the highlight bar up to adjust the selected item while OSD
menu is on.
[ ] button
7
Move the highlight bar down to adjust the selected item while OSD
menu is on.
MENU button
8
Return to previous menu while OSD menu is on, or to activate the
OSD menu when OSD menu is off.
9
MUTE INPUT
1
2
3
4
5
6
MENU
7
8
NOTE:
"Keyboard Control Lock Mode" This function completely
disables the access to all Keyboard Control functions. To
enable or disable the keyboard control lock, press both [ ]
and [ ] buttons and hold down continuously for more than
3 (three) seconds.
Remote control sensor and power status indicator
9
• Receives command signals from the remote control.
• Indicates the operating status of the display without OPS:
- Lights green when the display is turned on
- Lights red when the display is in standby mode
- Lights amber when the display enters APM mode
- When {SCHEDULE} is enabled, the light blinks green and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned off
• Indicates the operating status of the display with OPS:
- Lights green when the display is on, but the OPS is off
- Lights blue when the display and the OPS is on
- Lights red when the display is in standby mode
- Lights amber when the display enters APM mode
- When {SCHEDULE} is enabled, the light blinks green and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned off
8