Epson Stylus Pro 9600 Photographic Dye Ink Informationen zum Produkt - Seite 8

Blättern Sie online oder laden Sie pdf Informationen zum Produkt für Software Epson Stylus Pro 9600 Photographic Dye Ink herunter. Epson Stylus Pro 9600 Photographic Dye Ink 15 Seiten. Large format digital colour printing
Auch für Epson Stylus Pro 9600 Photographic Dye Ink: Broschüre & Specs (24 seiten), Handbuch zum Auspacken und Einrichten (24 seiten), Informationshandbuch (16 seiten), Teileliste (21 seiten), Handbuch zur Schnellinstallation (34 seiten), Kurzreferenz-Handbuch (11 seiten), Broschüre & Specs (8 seiten), Broschüre & Specs (6 seiten), Broschüre & Specs (16 seiten), Produkt-Referenzhandbuch (28 seiten), Spezifikationen (4 seiten), Handbuch Update (4 seiten)

Seite drucken
Epson Stylus Pro 9600 Photographic Dye Ink Informationen zum Produkt
EPSON Stylus Pro 7600 and 9600

Printing a Status Check

The status check shows the amount of ink remaining in each
cartridge, the page count, and the status of the cutter blade,
maintenance tank, and other printer parts.
NOTE: You can replace the ink cartridges, cutter blade, and
maintenance tank yourself. Other parts need to be replaced by an
authorized EPSON service technician.
Follow these steps to print the status check:
1. Load a sheet of paper in the printer. (You can print test
pages on roll paper, but you will use more paper.)
2. Press the SelecType button on the control panel. You see

PRINTER SETUP.

3. Press d so you see TEST PRINT, then press r . You see

NOZZLE CHECK.

4. Press d so you see STATUS CHECK, then press r . You
see PRINT.
5. Press Enter. The status check sheet prints.
The amount of ink left or the component life is indicated as
follows:
E*****F = full (or full life remaining)
E**** F = 3/4 full (or 3/4 life remaining)
E***
F = 1/2 full (or 1/2 life remaining)
E**
F = 1/4 full (or 1/4 life remaining)
E*
F = nearly empty (or service life near end)
E
F = empty (or service life ended)
6. Press Pause to exit the Test Print menu.
9 - EPSON Stylus Pro 7600 and 9600

Replacing an Ink Cartridge

The easiest way of checking ink levels is from the control
panel:
(full)
black*
black*
cyan
magenta
light cyan
light magenta
yellow
*
If your printer uses UltraChrome ink, the black ink cartridges may be
a combination of Photo Black, Matte Black, or Light Black.
When one of the Ink Out lights is flashing (and INK LOW is
displayed on the control panel), the corresponding cartridge is
almost out of ink. Make sure you have a replacement
cartridge. When the light stays on and INK OUT is displayed,
the cartridge is empty. You must replace the cartridge before
you can continue printing.
See page 5 for information on selecting the correct
replacement cartridges. Before you start, make sure the printer
is turned on. Then follow these steps to replace an ink
cartridge:
1. Note the color of the cartridge whose Ink Out light is on or
flashing. This is the cartridge you need to replace.
2. Open the ink compartment cover.
7/02
(almost
empty)