Epson Stylus RIP Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Software Epson Stylus RIP herunter. Epson Stylus RIP 43 Seiten. Epson stylus color 3000: user guide
Auch für Epson Stylus RIP: Handbuch zur Schnelleinrichtung (4 seiten)

Seite drucken

In the direct connection configuration, the client

Macintosh sends a print job to the print server, which puts

the job in a print queue and then sends it to the printer.

This speeds up transmission of the job because it is sent

over the network only once.

In a "typical" network configuration, the print server and

client Macintosh computers are all connected to the printer

via an optional interface card, with the StylusRIP software

(server or client version) installed on all the computers.

clients

printer

In a typical configuration, the print job is sent over the

network twice before it is printed: once from the client to

the printer server and once from the printer server to the

printer.

Note:

You may experience problems if you have more than one printer on

the network in a "mixed" configuration. For example, if you have

one EPSON Stylus printer connected to a serial port and set up as

remote only and another connected via a network interface card on

the same network, you cannot set the network/AppleTalk

panel for remote only and Ethernet at the same time.

print server

optional interface card

Introduction

control