Philips 3 DISC SHELF SYSTEM ESTIMATE FWC71C37 Benutzerhandbuch - Seite 23

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Stereo System Philips 3 DISC SHELF SYSTEM ESTIMATE FWC71C37 herunter. Philips 3 DISC SHELF SYSTEM ESTIMATE FWC71C37 29 Seiten. 3 cd changer with 120 watts total power logic deck and variable incredible surround
Auch für Philips 3 DISC SHELF SYSTEM ESTIMATE FWC71C37: Spezifikationen (2 seiten)

Seite drucken

• To exit without storing the setting,

press Ç on the system.

Notes:

– During clock setting, if no button is

pressed within 90 seconds, the system

will exit clock setting mode

automatically.

– When a power interruption occurs, the

clock setting is erased.

Timer Setting

• The system can switch on to CD,

TUNER, or TAPE 2 mode

automatically at a preset time. It can

serve as an alarm to wake you up.

• Before setting the timer, make sure

the clock is set correctly.

• The timer will always be switched on

once it is set.

• The volume of the timer will

increase from the minimum

level until the volume level

before the set is switched to

standby mode.

1 Press and hold CLOCK/TIMER for

more than two seconds to select

timer mode.

™ " AM 12:00" or "00:00" or

the last timer setting starts flashing

depending on whether you have

selected 12- or 24-hour mode.

™ The

starts flashing.

TIMER

pg 01-27/C71-C72/37-Eng

TIMER

™ The selected source is lit while

other available sources are

flashing.

2 Press CD, TUNER or TAPE to

select the desired source.

• Before selecting CD or TAPE, make

sure a CD or tape is loaded in the

CD tray or tape deck 2.

3 Press à or á on the system to set

the hour for the timer to start.

4 Press í or ë on the system to set

the minute for the timer to start.

5 Press CLOCK/TIMER to store the

start time.

™ The timer is now set.

™ The

remains on the display.

TIMER

• At the preset time, the timer will be

activated.

™ The selected source will be

played.

Notes:

– During timer setting, if no button is

pressed within 90 seconds, the system

will exit timer setting mode

automatically.

– If the source selected is TUNER, the

last tuned frequency will be switched

on.

– If the source selected is CD, playback

will begin with the first track of the

selected disc or program. If the CD

trays are empty, TUNER will be

selected instead.

– If the source selected is TAPE, and if

the preset time is reached during high

speed dubbing, the TUNER will be

selected instead.

– The timer will not activate if a recording

is in progress.

To switch off the TIMER

1 Press and hold CLOCK/TIMER for

more than two seconds.

2 Press Ç on the system to cancel the

timer.

™ The timer is now switched off.

™ The display will show "OFF" and

the

disappears.

TIMER

To start the TIMER again (for the

same preset time and source)

1 Press and hold CLOCK/TIMER for

more than two seconds.

2 Press CLOCK/TIMER again to

store the start time.

™ The timer is now on.

™ The

appears on the display.

TIMER

12/16/99, 1:20 PM

SLEEP TIMER

Sleep Timer

(only on remote

control)

This feature allows you to select a

length of time after which the system

will switch to the standby mode

automatically.

1 Press SLEEP TIMER on the

remote control repeatedly to select a

period of time.

™ The selections are as follows (time

in minutes):

60 ™ 45 ™ 30 ™ 15 ™ OFF ™

60 ...

™ "SLEEP XX" or "OFF" will be

displayed. "XX" is the time in

minutes.

2 When you reach the desired length

of time, stop pressing the SLEEP

TIMER button.

™ After this amount of time passes,

the system will switch to the

standby mode.

To switch off the Sleep Timer

• Press SLEEP TIMER repeatedly

until "OFF" is displayed, or press the

STANDBY ON button.

3139 116 19521 (ENG)