Philips AZ 2785 Benutzerhandbuch - Seite 18

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Stereo System Philips AZ 2785 herunter. Philips AZ 2785 47 Seiten. Portable cd mini system
Auch für Philips AZ 2785: Spezifikationen (2 seiten), Spezifikationen (2 seiten), Service-Handbuch (37 seiten), (Spanisch) Manual Del Usuario (19 seiten)

Seite drucken

TROUBLESHOOTING

If a fault occurs, first check the points listed below before taking the set for repair.

If you are unable to remedy a problem by following these hints, consult your dealer or service center.

WARNING:

Do not open the set as there is a risk of electric shock. Under no

circumstances should you try to repair the set yourself, as this would

invalidate the warranty.

PROBLEM

– POSSIBLE CAUSE

• REMEDY

No sound/power

– VOLUME is not adjusted

• Adjust the VOLUME

– Headphones connected

• Disconnect headphones

– Power cord not securely connected

• Connect AC power cord properly

– Batteries dead/ incorrectly inserted

• Insert (fresh) batteries correctly

Display does not function properly/ No

reaction to operation of any of the controls

– Electrostatic discharge

• Switch off set, disconnect the power plug

and reconnect after a few seconds

CD playback does not work

– CD is badly scratched/ dirty

• Replace/ clean CD (see MAINTENANCE)

– Laser lens steamed up

• Wait until lens has acclimatized

Environmental information

All unnecessary packaging material has been omitted. The packaging can be easily separated into

three materials: cardboard, polystyrene and plastic.

Your set consists of materials which can be recycled if disassembled by a specialized

company. Please observe the local regulations regarding the disposal of packing

materials, dead batteries and old equipment.

The CD skips tracks

– CD is damaged or dirty

• Replace or clean the CD

– SHUFFLE or a program is active

• Quit SHUFFLE/PROGRAM mode(s)

Poor cassette sound quality

– Dust and dirt on the heads, etc.

• Clean deck parts etc., see maintenance

– Use of incompatible cassette types (METAL

or CHROME).

• Only use NORMAL (IEC I) for recording.

Recording does not work

– Cassette tab(s) may be broken

• Apply a piece of adhesive tape over the

missing tab space.

For AZ 2765 model only

Remote control does not function properly

– Batteries dead/ incorrectly inserted

• Insert (fresh) batteries correctly

– Distance between the set too large

• Reduce the distance