Philips AZ 2905 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Stereo System Philips AZ 2905 herunter. Philips AZ 2905 21 Seiten. Cd radio cassette recorder
Auch für Philips AZ 2905: Benutzerhandbuch (21 seiten), Benutzerhandbuch (2 seiten), Spezifikationen (2 seiten), Spezifikationen (2 seiten), Benutzerhandbuch (21 seiten), Benutzerhandbuch (21 seiten)

Seite drucken

RADIO

Tuning to radio stations

1 Select the tuner by pressing the CD*TAPE*TUNER button

several times until

usm

appears on the display.

2 Select the wave band by using the BAND selector.

-► Display indication: the selected waveband

3 Press TUNING

for approx, one second and then release

the button.

-► The radio automatically tunes to a station with sufficent

strength. Display indication during automatic tuning: Sr c h

4 Repeat this procedure until you find a desired station.

To tune to a weak transmitter briefly press TUNING k« or »i as

often as necessary for optimum reception, or until the correct

frequency is indicated in the display.

Improving the RADIO reception

• For

and

SW,

pull out the telescopic antenna. To improve the

signal, incline and turn the antenna. Reduce its length if the

signal is too strong (very close to a transmitter).

• For

AM, MW

and

LW,

direct the built-in antenna by turning the

whole set. The telescopic antenna is not needed.

mrrrf^

i no cn

t uuuu

FTTTTTt^

C_L

lii

Switchable tuning grid (not all versions)_

In North and South America the frequency step between adjecent

channels in the AM band is 10 kHz. In the rest of the world this

step is 9 kHz. Usually this frequency step has been preset in the

factory of your area. (/01 versions only)

In some versions the frequency step can be changed:

• Keep the BAND selector button pressed for more than 5

seconds.

-► The display shows either HJ Sr id or 9 Sr id.

Programming radio stations (29 preset stations)

You can store up to 29 radio stations in the memory. When tuning

to a preset station, the preset number (1 to 29) is indicated in the

display.

1 Select the tuner by pressing the CD*TAPE*TUNER button

several times until IM3 appears on the display.

2 Tune to a desired station with TUNING m or^w, as described

earlier.

-► If the frequency is already stored in the memory, the preset

number will be displayed.