Basic Operations
Basic function
Switching on/off the system and selecting
sound source
1
To select your sound source (switch on the
system), adjust the source selector on the set
to: DVD/VCD/CD, FM, TAPE source.
➜ The system will switch to the selected source.
3
To switch off the system, adjust the source
selector on the set to OFF position and check
the cassette keys are released.
Adjusting volume
●
Adjust the volume with VOLUME control.
Switching off the volume temporarily
●
In disc mode, press MUTE on the remote
control.
➜ "MUTE" is displayed.
Press MUTE again to cancel the MUTE mode.
12
Disc Operations
IMPORTANT!
– This system is designed for regular
discs. Therefore, do not use any
accessories such as disc stabiliser rings or
disc treatment sheets, etc., as offered on
the market, because they may jam the
disc mechanism.
– Do not move the system during
playback. Doing so may damage the
system.
– Do not put any object other than disc
on the disc tray. Doing so may cause the
system to malfunction.
– DVD discs and players are designed
with regional restrictions. Before playing
a disc, make sure the disc matches the
regional code of your player.
– According to the format requirement
of DVD or VCD, some operations may be
different or restricted.
Playing discs
1
Push the source switch to the disc mode on the
system.
2
Power on the TV system and set to the correct
Video In channel .
➜ You should see the blue Philips DVD
background screen on the TV set.
3
Lift the disc cover to open the disc tray and load
a disc respectively.
➜ Make sure the disc label is facing up. For
double-sided discs, load the side (marked "side
A" or "side B") you want to play facing up.
4
Press the disc cover to close the disc tray.
➜
will be displayed.
●
Some discs can play automatically. For discs with
Table Of Contents, a menu may appear on the
TV screen. When the menu is displayed, press
5 / 4 /
/
keys to highlight your selection
A
B
and press OK to confirm. To select a play
option, press numeric keys (0-9).
➜ If the disc is locked by parental control, you
must enter your four-digital password .
Press 38 on the front panel or PLAY
5
the remote control to start playback.
Notes:
– Load discs with the label side facing up.
– To ensure good system performance, wait until
disc reading is completed before proceeding.
on
B
Seite drucken