MSI MSI-8000HD Benutzerhandbuch - Seite 26

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Monitor MSI MSI-8000HD herunter. MSI MSI-8000HD 48 Seiten. Rf remote display

Seite drucken
MSI MSI-8000HD Benutzerhandbuch
11) The current RF Channel
number is displayed.
If the offered RF Channel value is
correct, push
F1
14.
12) Press
F2
previous process, enter
the RF Channel number.
Recommended RF Channel numbers
range from 12 to 23. In this example
we'll use 21 as the RF Channel.
13) When the desired RF
Channel number is
shown and fixed, press
F1.
14) The next RF Setup Menu
item is the "nEtid"
(Network ID). Press
to see the current Net ID
number.
If the offered Network ID value is
correct, push
F1
17.
15) Using the numeric entry
process as before, input
a network ID number.
Press
F2
number.
Allowed Network ID numbers range
from 0 to 99999. MSI recommends
a random number of at least four
digits to ensure that the 8000
system won't conflict with any
other 802.11.4 networks (Zigbee).
16) When the final number is
shown and fixed, press
F1
to store the network
ID.
17) The menu displays StrEn.
Press the F1 to enter.
Press F2, using the
18)
numeric entry process,
input a transmission
strength number.
19) When the desired number
is displayed, press F1 to
store the number.
20) The RF setup menu goes
to the first menu, OnOff.
Press the
exit out of the RF setup
menus.
21) Press
ZERO
the COMM setup menu
and store the new RF
network numbers.
22
MSI-8000HD Operator's Manual
and jump to step
and using the
F1
and jump to step
to start a new
ZERO
key to
again to exit
Figure 5-3. RF Set Up (Continued)
blinking
SCROLL
blinking
ENTER/SELECT
fixed
SCROLL
blinking
ENTER/SELECT
ENTER/SELECT
current Net ID blinking
SCROLL
blinking
example value only
ENTER/SELECT
F1
ENTER/SELECT
F1
blinking
ENTER/SELECT
F1
EXIT/SAVE
0
ZERO
EXIT/SAVE
0
ZERO
SCROLL
blinking
SCROLL
blinking
ENTER/SELECT
fixed
Repeat number
entry procedure