Philips BTB3370 Benutzerhandbuch - Seite 17
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Stereo System Philips BTB3370 herunter. Philips BTB3370 26 Seiten.
Seite drucken
Store FM radio stations automatically
Note
•
You can program a maximum of 20 preset radio
stations (FM).
1
In tuner mode, press
the FM tuner menu.
» [SCAN] is displayed.
2
Press OK, and then press
through the menu options:
[STRONG] (strong stations): scan
•
stations with strong signals only.
•
[ALL] (all stations): scan all available FM
radio stations.
3
Press OK to select an option, and then
press
/MENU to exit the menu.
4
In FM tuner mode, press PROG/SCAN.
» The stations scanned are based on the
selection at step 2.
» The unit broadcasts the first scanned
FM radio station.
Store FM radio stations manually
1
Tune to an FM radio station.
2
Press PROG/SCAN to activate storing
mode.
» [PROG] (program) blinks.
3
Press ALBUM/PRESET
to select a radio frequency.
4
Press PROG/SCAN again to confirm.
» The frequency of the preset station is
displayed.
/MENU to access
/
to scroll
/
repeatedly
5
Repeat the above steps to store more FM
stations.
Note
•
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
In FM mode, press ALBUM/PRESET
•
to select a stored radio frequency, and
then press OK to confirm.
Show RDS information
Radio Data System (RDS) is a service
that allows FM stations to show additional
information.
1
Tune to an RDS station.
2
Press INFO repeatedly to scroll through
the following information (if available).
•
Radio text message
•
Program type
•
Frequency
Select stereo/mono broadcast
Note
•
Stereo broadcast is the default setting for tuner mode.
•
For stations with weak signals: to improve the reception,
switch to monaural sound.
In FM tuner mode, press OK to switch
•
between mono and stereo broadcast.
/
EN
15