Toshiba SD-2710 Benutzerhandbuch - Seite 17

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für DVD-Spieler Toshiba SD-2710 herunter. Toshiba SD-2710 50 Seiten. Video
Auch für Toshiba SD-2710: Benutzerhandbuch (50 seiten), Benutzerhandbuch (50 seiten)

Seite drucken

Table of

Notes on

7. Do not bloc

18. Keep your f

Warning

so may cause s

manufacturer

Introduction

On handlin

2, 4

• When you are connecting (via the BITSTREAM/PCM AUDIO OUT jack) an AV decoder that does not have Dolby Digital,

Playing in Random Order

Selecting the Camera Angle

DVD disp

Playing Repeatedly

Selecting the Picture Enhancement (E.P.M.*)

Selecting a Language

About the illustrations of the battery compartment

TOP MENU

Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set "Audio Out Select" to "PCM" from the on-

There are two types of battery compartment in the

PAUSE/STEP

screen displays

SKIP

38 40

supplied remote controls. (This does not mean a

SAFETY PRE

You can play titles, chapters within a title, or tracks in random order.

If the scene was recorded from multiple angles, you can easily change

You can play a specific title, chapter, track, or segment repeatedly.

You can easily select a preferred picture enhancement.

You can select a preferred language and sound recording system from those

PLAY

• When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog

difference in performance between the two.)

PLAY

(Random playback)

(Title repeat, chapter/track repeat, A-B repeat)

the camera angle of the scene you are watching.

included on the DVD video disc.

IMPORTANT

STOP

stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the ANALOG

Refer to either illustration depending on the actual

's instructions.

Do not touch th

*E.P.M.: Enhanced Picture Mode

Open the cov

remote control.

AUDIO OUT (L/R) jacks of the DVD video player are connected to an amplification system. To enjoy DTS Digital

Precautions ..

ENTER

Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the

ENTER

19. Do not plac

Notes on Disc

CLEAR

Loading batteries

BITSTREAM/PCM AUDIO OUT jack of the DVD video player.

causing serious

Good morning!

Notes on regio

Table of Cont

TOP MENU

Connecting to an amplifier equipped with an MPEG2 audio decoder

Connecting to an audio system and TV equipped with component video inputs

Number buttons

Identification

MPEG2 sound

8. Do not install near any heat sources such as radiators, heat registers, stoves,

Play mode ind

DVD

Front panel ....

DVD

Playing titles, chapters or tracks in random order

Selecting a playback audio setting

Changing the camera angle

Selecting the picture enhancement

Repeating a title, chapter, or track

Playing in slow-motion

Locating a specific chapter or track directly

DVD

You can enjoy motion picture and live concert DVD video discs with dynamic

VCD

DVD

or other apparatus (including amplifiers) that produce heat.

VCD

Rear panel ......

realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder

Signal flow

or MPEG2 audio processor.

Do not attach pa

DVD display ..

20. Do not use a

To pause playback (still mode)

broken and ma

Remote contro

Press RANDOM.

DVD

Press ANGLE while playing a scene

Press SLOW during playback.

Press REPEAT.

Press T.

Press E.P.M.

Press AUDIO during playback.

Press PAUSE/STEP during playback.

Loading batter

recorded with multiple angles.

RANDOM

Each time you press the RANDOM

E.P.M.

SLOW

If you are using a VIDEO CD/audio CD, skip steps 1

AUDIO

The picture enhancement menu

The current audio setting is

Each time you press the REPEAT

Each time you press the SLOW

Insert batterie

REPEAT

2 3

To resume normal playback, press

PAUSE/STEP

Operating with

VCD

and 2. Then at step 3, enter the number for the track

button, the random playback mode

ANGLE

button, the slow-motion speed

button, the repeat mode changes as

displayed.

appears.

Connection

While playing a scene recorded with

the PLAY button.

you want using the number buttons.

changes as follows.

follows.

changes.

multiple angles, the angle icon ( )

On cleanin

• The sound is muted during still

flashes in the DVD display.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

e.g.

Connecting to

Press the ANGLE button while the

polarized plug has two blades with one wider than the other. A grounding

angle icon is flashing.

type plug has two blades and a third grounding prong. The wide blade or the

Connecting to

To stop playback

third prong are provided for your safety. If the provided plug does not fit into

Connecting to

e.g.

Press STOP.

your outlet, consult an electrician for replacement of the obsolete outlet.

Fingerprints and

Chapter Repeat

DVD

Press

to highlight the space of

equipped with

Resuming playback from the same location

Chapter Random

DVD

VCD

sound deteriorat

Connecting to

To ANALOG AUDIO OUT

STOP

"C (Chapter)."

outwards with a

Connecting to an amplifier equipped with a digital audio input

Title Repeat

Connecting to

DVD

clean.

Dolby Digital

Press STOP at the location where you

DVD/VIDEO C

Title Random

DVD

VCD

Track Repeat

The abbreviation of the language appears instead

2 channel digital stereo

To remove the disc

Connecting to

want to interrupt playback.

ENTER

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an

of the language name. Refer to the list of

Dolby Pro Log

Make sure to m

Press OPEN/CLOSE.

To audio inputs of

amplifier equipped with a digital audio input and speaker system (right and left front

STOP

The DVD video player memorizes

languages and their abbreviations.

VCD

DVD

Track Random

the amplifier

10. Protect the power cord from being walked on or pinched particularly at plugs,

Connecting to

All Repeat

speakers).

VCD

the location where playback is

Remove the disc after the disc tray

convenience receptacles, and the point where they exit from the apparatus.

DTS decoder .

stopped.

opens completely.

OPEN/CLOSE

Press ANGLE or

Enter the number for the chapter or

Selecting sound channels of VIDEO CDs

Connecting to

Repeat Off

number is displayed on the TV screen.

track you want, using

MPEG2 audio

You can switch left and right channels by pressing the

Press PLAY.

If you cannot w

number buttons.

AUDIO button repeatedly during playback.

Connecting to

Random Off

Each time you press the ANGLE

ANGLE

to the marks inside the battery compartment.

the disc lightly w

The DVD video player resumes

PLAY

Select the picture enhancement by

To OPTICAL

digital audio in

button, the camera angle changes.

Basic playb

When you use the number buttons, you can use

finish with a dry

playback from the location where

type digital

pressing E.P.M. or

DVD

the +10 button to select numbers from 10 through

Close the cover.

Repeating a specific segment

audio input

Do not use any

you stopped playback.

The indicators v

If you press the RANDOM button

VCD

When you start playback, the elapsed time indicators appear. Pressing the FL SELECT button switches

Press DISPLA

99.

benzine, comme

during playback, the DVD video

Playing a Dis

them to the title/chapter/track number indicators. Some discs may not permit this operation.

11. Only use attachments/accessories specified by the manufacturer.

Each time you press the button, the picture

spray for vinyl L

You can change the camera angle

DVD video d

On storing

e.g. To select chapter or track 25

player automatically starts random

ENTER

enhancement changes.

directly by pressing the number

Press A-B RPT at the beginning of the

Basic playback

playback after finishing the current

buttons corresponding to its angle

Component video (ColorStream

title, chapter or track.

segment (point A) you want to play

Playing in fast

Be sure to press the OPEN/CLOSE button to close

number instead of using the /

Some TVs or monitors are equipped with component video inputs. Connecting to

Notes on batteries

directions .......

repeatedly.

the disc tray after you remove the disc.

+10

Output sound conversion table (sampling frequency/quantization bit)

buttons.

these inputs allows you to enjoy higher quality picture playback.

Improper use of batteries may cause battery leakage and

Normal:

Press PLAY.

Playing frame

Do not store dis

Actual labels for component video inputs may vary depending on the TV

A-B RPT

corrosion. To operate the remote control correctly, follow the

Standard black level (7.5 IRE).

Playing in slow

The DVD video player starts random

or near heat sou

PLAY

instructions below.

manufacturer. (ex. Y, R-Y, B-Y or Y, C

2 3 0 : 0 8 : 1 6 9.6

Recording system

Resuming play

Discs

playback.

Do not store dis

12.Use only with the cart, stand, tripod, bracket, or table specified by the

• Do not insert batteries into the remote control in the wrong

In some TVs or monitors, the color levels of the playback picture may be reduced

DVD

Locating a Sp

Locating a specific chapter or track

Press the PLAY button within about

dust such as a b

Enhanced Black Level:

manufacturer, or sold with the apparatus. When a cart is used, use caution

direction.

VCD

slightly or the tint may change. In such a case, adjust the TV or monitor for

Track ...........

5 seconds after you press the

• During playback:

Store discs verti

Enhanced Black Level (0 IRE).

when moving the cart/apparatus combination to avoid injury from tip-over.

• Do not charge, heat, open, or short-circuit the batteries.

optimum performance.

RANDOM button.

objects on discs

Do not throw batteries into a fire.

Locating a title

Example

warping.

• Do not leave dead or exhausted batteries in the remote

Press A-B RPT again at the end of the

Press SKIP

Notes

Locating a title

Movie 1:

TITLE

control.

DVD video

segment (point B).

the chapter or track number you want.

Linear PCM

• DO NOT connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the AC-3 RF input of a Dolby Digital

DVD

Brightness levels raised for

Locating a spec

discs

• Do not use different types of batteries together, or mix old

Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM

Playback starts from the selected chapter or track.

The DVD video player automatically

enhanced picture clarity.

Some discs may

and new batteries.

Locating a spec

A-B RPT

AUDIO OUT jack of the DVD video player.

returns to point A and starts repeat

numbers or elaps

• If you do not use the remote control for a long period of

SKIP

Notes

Playing chapter 3 of title 2

To locate succeeding chapters or tracks

Movie 2:

• Connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the "OPTICAL" or "COAXIAL" input of a

playback of the selected segment

time, remove the batteries to avoid possible damage from

Notes

• Refer to the owner's manual of the connected equipment as well.

To turn off the

For deeper, richer color

Receiver or Processor.

(A-B).

battery corrosion.

• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment

• Do not move the DVD video player during playback. Doing so may damage the disc.

VIDEO CDs

DISPLAY agai

• Refer to the owner's manual of the connected equipment as well.

reproduction.

SKIP

Playback starts from the beginning of

• If the remote control does not function correctly or if the

• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may

from the wall outlet before making any connections.

Linear PCM 44.1 kHz/16 bit

• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment

Audio CDs

the current chapter or track.

operating range becomes reduced, replace all batteries

• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the

cause the DVD video player to malfunction.

Animation:

from the wall outlet before making any connections.

with new ones.

When you press twice, playback starts

• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video

DVD video player away from the tuner and radio.

For enhanced color contrast.

• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate

• If battery leakage occurs, wipe the battery liquid from the

• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate

player to malfunction.

from the beginning of the preceding

listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

battery compartment, then insert new batteries.

• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen

listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

chapter or track.

• Turn off the amplifier before you connect or disconnect the DVD video player's power cord. If you leave the amplifier power

menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the

on, the speakers may be damaged.

STOP button on your remote control once the movie is completed.

on, the speakers may be damaged.

Downloaded From DvDPlayer-Manual.com Toshiba Manuals

To obtain a higher quality picture

Occasionally, some picture noise not usually visible during a normal broadcast

may appear on the TV screen while playing a DVD video disc because the high

. Otherwise, high volume sound may damage your hearing as well as the speakers.

resolution pictures on these discs include a lot of information. While the amount of

noise depends on the TV you use with this DVD video player, you should generally

reduce the sharpness adjustment on your TV when viewing DVD video discs.

About

DVD

The

DVD

VCD

function described under that heading.

¡ B uenos d í a s!

Bonjour!

: You can use this function with DVD video discs.

DVD

Total playi

: You can use this function with VIDEO CDs.

VCD

: You can use this function with audio CDs.

Playback sid

Title numbe

Amplifier equipped with an

VIDEO OUT

AUDIO OUT

TITLE

VIDEO

MPEG2 audio decoder

To OPTICAL

To COAXIAL

type digital

e.g.

COAXIAL OPTICAL

type digital

ANALOG

BITSTREAM/PCM

audio input

mode.

audio input

Chapter Repeat

–

– –

Chapter Random

ENG1 PCM 2CH

(red)

(white)

ENG2

D 2CH

Repeats the current

To P

Plays the chapters

chapter.

VIDEO

within the current title

Multifuncti

OUT

in random order.

Repeats the current

messages, e

e.g.

title.

–

– –

Plays the titles in

Repeats the current

random order.

track.

Plays the tracks in

Repeats the entire

random order.

disc.

(red)

(white)

while the angle

Resumes normal

Amplifier equipped with

or the

– on the batteries

a digital audio input

playback.

Resumes normal

playback.

To COAXIAL

type digital

/ .

audio input

Audio system

) outputs/inputs

+10

, C

)

A–

BITSTREAM/PCM

jack

Dolby Digital

• During playback:

Bitstream

48 kHz/16 bit

Example

48 kHz/20 bit

48 kHz/16 bit

repeatedly to display

CHP

48 kHz/24 bit

48 kHz/16 bit

96 kHz/16 bit

48 kHz/16 bit

VCD

96 kHz/20 bit

48 kHz/16 bit

96 kHz/24 bit

48 kHz/16 bit

OFF

DTS

Bitstream

MPEG1, MPEG2

Bitstream

44.1 kHz/16 bit 44.1 kHz/16 bit

MPEG1

44.1 kHz/16 bit

Some discs may not display track

Bitstream

DTS

numbers or elapsed time.

A– B

Advan

Struct

Accessi 26

Pressing

control c

Entering

Normally

location

the titles

Playing

VCD

audio CD

Operating with the remote control

icons on the heading bar show the playable discs for the

FL DIM

Repeati

DVD vid

Repeati

Playing

Point the remote control at the remote

* *

Chapter n

sensor and press the buttons.

Title 1

Setting

order ...

Chapter 1

Memor

Playing

: Title n

Playing

To resume normal playback

About the screen saver

To exit the picture enhancement selection

To turn off the angle number display

To resume normal playback

Locate a

Press PLAY.

Press AUDIO or

Press PLAY.

order ...

Press CLEAR.

Press ENTER.

Press PLAY.

If you pause a picture of a DVD video disc and leave it

Press CLEAR.

Zoomin

setting is displayed on the TV screen.

: Chapte

still for a long while, the screen saver of the DVD video

PLAY

CLEAR

TOTAL

CHP

VIDEO C

PLAY

AUDIO OUT

CLEAR

VIDEO OUT

Locate a

VIDEO

player automatically appears (when "Screen Saver" is

AUDIO

Zoomin

Selectin

set to "On"

COAXIAL OPTICAL

Track number

ANALOG

ENTER

BITSTREAM/PCM

: To stop

Within about 7 m (23 feet)

PLAY button.

(E.P.M.

indicator

To select a title and chapter number at the same

Connect either.

Notes

Note

Track 1

coaxial cable

time

Selectin

• Some discs may not permit random playback operation.

Notes

The sound is muted during slow-motion playback.

Automatic Power Off function

: Playba

Selectin

• You cannot use the random playback function in conjunction

Optical digital cable

• You can change the camera angle during still playback. The

Perform step 1, and enter a title number you want in the

current

If the DVD video player is stopped, or the screen saver

ENTER

(E.A.M

with the memory playback function.

camera angle changes to the new setting when you resume

space of "T (Title)" using the number buttons or the

is engaged for approximately 20 minutes, the DVD

To resume normal playback

To P

To Y

: Fast re

normal playback.

buttons then perform steps 2 to 4.

Note

video player will automatically turn itself off.

Each title

VIDEO

Selectin

Press CLEAR.

• If you pause a picture immediately after changing a camera

Actual effect to picture may vary depending on the TV. Make

Selectin

Distance: About 7 m (23 feet) from the front of the

is called

OUT

angle, the resumed playback picture may not display the new

selection according to your preference.

Note

CLEAR

remote sensor

To start playback from the beginning regardless

: To star

camera angle.

Pressing the CLEAR button resets the title and chapter

Changin

Angle:

About 30 in each direction of the front of

of the location where you stopped playback

Selectin

numbers. To clear the "T (Title)" and "C (Chapter)" display,

To turn off the audio setting display, press the

the remote sensor

1 Press STOP twice.

press the T button several times.

CLEAR button.

: Fast fo

Selectin

Note

"title number", "chapter number" or "track

* Do not expose the remote sensor of the DVD video

Selectin

STOP

Some discs may not permit repeat operation.

number" respectively.

player to a strong light source such as direct

To Y video input

There may be discs that do not have these numbers.

: To loca

Selectin

sunlight or other illumination. If you do so, you may

Notes

On-scre

not be able to operate the DVD video player via the

2 Press PLAY.

• When you turn on the DVD video player or replace a disc,

VIDEO OUT

AUDIO OUT

To P

VIDEO

remote control.

player returns to the initial default setting

Notes on copyright

On-scre

: To beg

PLAY

Functi

If you select a sound track which is not included on the disc,

COAXIAL OPTICAL

ANALOG

BITSTREAM/PCM

To P

the DVD video player plays a prior sound track programmed

Connect either.

It is forbidden by law to copy, broadcast, show,

on the disc.

Notes on the remote control

: To pau

Custom

broadcast on cable, play in public, and rent copyrighted

coaxial cable

• Some discs allow you to change audio selections only via

• Direct the remote control at the remote sensor of the DVD

material without permission.

the disc menu. If this is the case, press the MENU button

video player.

Optical digital cable

Setting

To resume normal playback

• If you want to return to the beginning of a DVD video

: To turn

and choose the appropriate language from the selections on

• Do not drop or give the remote control a shock.

Setting

Others

disc, open and close the disc tray once with the

DVD video discs are copy protected, and any recordings

Press CLEAR.

the disc menu.

• Do not leave the remote control near an extremely hot or

OPEN/CLOSE button before pressing the PLAY

made from these discs will be distorted.

humid place.

CLEAR

button.

• Do not spill water or put anything wet on the remote

The on-s

Table o

This product incorporates copyright protection

control.

Audio selection from the menu

VIDEO CD

Notes

Before

• Do not open the remote control.

technology that is protected by method claims of certain

: Data tra

"Bitstream"

"Analog 2ch"

• The DVD video player's memory is also cleared when:

U.S. patents and other intellectual property rights owned

Notes

Specifi

= Amou

ANALOG AUDIO

BITSTREAM/PCM

– you change the parental lock setting

• Some discs may not permit A-B repeat operation.

by Macrovision Corporation and other rights owners.

OUT jacks

jack

DVD vid

DVD

LIMITE

menu language

• You cannot set the A-B repeat function for a segment that

Use of this copyright protection technology must be

The larg

Bitstream

48 kHz/20 bit

– you open the disc tray.

PLAYE

includes multiple camera angles

authorized by Macrovision Corporation, and is intended

48 kHz/16 bit

but this d

48 kHz/16 bit

Notes

• There may be a difference in the location where playback

• You can specify a segment only within the current title or

for home and other limited viewing uses only unless

48 kHz/20 bit

quality.

48 kHz/16 bit

• Some titles may not display chapter numbers.

resumes depending on the disc.

track (VIDEO CD).

otherwise authorized by Macrovision Corporation.

48 kHz/24 bit

48 kHz/16 bit

TRK

• If you press and hold the SKIP

• Settings you changed using the on-screen displays while the

• There may be a slight difference between point A and the

48 kHz/16 bit

: CD-Tex

Reverse engineering or disassembly is prohibited.

panel during playback, the DVD video player performs fast

DVD video player keeps a location in the memory may

location where playback actually resumes depending on the

48 kHz/20 bit

Displays

reverse or fast forward playback. You can vary the speed by

function only after the memory is cleared.

48 kHz/24 bit

disc.

CDs. (So

Playing track 6

pressing the button repeatedly.

dependin

Bitstream

To locate chapters or tracks during fast reverse or fast

48 kHz/16 bit

Bitstream

forward playback, first press the PLAY button to resume

: The on

44.1 kHz/16 bit

normal playback, then use the SKIP

44.1 kHz/16 bit

• When you set "Title Stop" to "Off"

(Noise)

VCD

Bitstream

chapters in another title. If you go back to the preceding title

by pressing the SKIP

locates the first chapter of the title. When "Title Stop" is set

to "On," you can access chapters only within the current title.

PLAY

Dimm

Norma O

ENTER

1, 2

CLEAR

1, 2

CLEAR

REPEAT

DVD v

A-B RPT

Title

while the audio

• Use DVD video discs encoded via

the MPEG2 recording system.

The DVD video player starts repeat

Playback starts from the selected

AC IN

A - B

• Make the following setting.

chapter or track.

playback.

Alternatively leave the DVD video

Each time you press the AUDIO

Press the PLAY button within about

). To turn off the screen saver, press the

button, the audio settings included

player unattended for about 5

On-screen display

5 seconds after you press the

seconds after having made a

on the DVD video disc change.

Random playback indicator

REPEAT button.

selection.

"Audio Out Select"

Recording system

VIDEO CD/audio CD

If you press the /

can select output sound format.

Angle

Repea

The DVD video player ' s memory is

cleared.

video input

• Make the following setting.

Playback starts from the

DVD

beginning of the current title.

On-screen display

video input

Playback starts from the

VCD

"Audio Out Select"

TV or monitor with

beginning of the disc.

component video inputs

Aud

• Make the following setting.

On-screen display

and output jacks on the rear panel

"Audio Out Select"

"Analog 2ch"

ANALOG AUDIO

BITSTREAM/PCM

OUT jacks

jack

48 kHz/20 bit

• During playback:

48 kHz/16 bit 48 kHz/20 bit

48 kHz/16 bit

Example

48 kHz/20 bit

48 kHz/16 bit

48 kHz/24 bit

48 kHz/16 bit

96 kHz/16 bit

48 kHz/16 bit

S3125A

96 kHz/20 bit

48 kHz/16 bit

96 kHz/24 bit

48 kHz/16 bit

Playing track 6

48 kHz/16 bit

48 kHz/16 bit 48 kHz/16 bit

44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit

44.1 kHz/16 bit

, you can access

(Noise)

Bitstream

: 3D (N-2-2) sound enhancement can function.

button, the DVD video player

Select:

Page

"Bitstream"

To wall outlet

MPEG

buttons, you

Select:

Page

"PCM"

Select:

Page

"PCM"

ANALOG AUDIO

or select a disc

OUT jacks

48 kHz/16 bit

48 kHz/20 bit

TRK

48 kHz/24 bit

button on the front

48 kHz/16 bit

48 kHz/20 bit

48 kHz/24 bit

44.1 kHz/16 bit

button.

(Noise)