Philips DCM2020 Benutzerhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Stereo System Philips DCM2020 herunter. Philips DCM2020 21 Seiten. Micro music system
Auch für Philips DCM2020: Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten), Benutzerhandbuch (21 seiten), Schnellstart-Handbuch (2 seiten), Benutzerhandbuch (23 seiten), Schnellstart-Handbuch (2 seiten), Benutzerhandbuch (22 seiten), Benutzerhandbuch (22 seiten), Broschüre (3 seiten), Schnellstart-Handbuch (2 seiten), Gebrauchsanweisung (21 seiten), Benutzerhandbuch (23 seiten)

Seite drucken
Philips DCM2020 Benutzerhandbuch
Program radio stations
manually
Note
•
You can program a maximum of 20 preset radio
stations.
1
Tune to a radio station.
2
Press PROG/CLOCK SETto activate
programming mode.
3
Press
/
to select a number from
1–20 for this radio station, then press
PROG/CLOCK SET to confirm.
» The preset number and the frequency
of the preset station are displayed.
4
Repeat steps 2-3 to program other
stations.
Note
•
To overwrite a programmed station, store another
station in its place.

Tune to a preset radio station

1
Press
/
to select a preset number.

Show RDS information

RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1
Tune to an RDS station.
EN
16
2
Press RDS repeatedly to scroll through the
following information (if available):
» Station name
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» RDS clock
» Frequency
Synchronize clock with RDS
You can synchronize time shown on the unit
with that on the RDS station.
1
Tune to a RDS radio station that transmits
time signals.
2
Press RDS for over 2 seconds.
» [CT SYNC] is displayed and the unit
reads RDS time automatically.
» If no time signal is received, [NO CT]
is displayed.
Note
•
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.