Toshiba SD6100 - SD DVD Player Benutzerhandbuch - Seite 32
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für DVD-Spieler Toshiba SD6100 - SD DVD Player herunter. Toshiba SD6100 - SD DVD Player 40 Seiten. Dvd player with 1080p upconversion
Auch für Toshiba SD6100 - SD DVD Player: Spezifikationen (2 seiten)
Seite drucken
Function setup
Customizing the Function Settings (continued)
Setting details
Digital Output
Selects the output sound format corresponding to your
system connection.
1) Press SETUP button.
2) Press
/
button to select Audio.
3) Press
button, then use the
/
Digital Output.
4) Press
ENTER
button, then use
the
/
button
to
select
the
output
sound
format (Off, PCM
or Raw).
5) Press
ENTER
button.
6) Press SETUP button to exit the menu.
PCM: Select when connected to a Multi-channel digital
stereo amplifier. The DVD player outputs sound in the PCM
Multi-channel format when you play a DVD recorded on the
Dolby Digital, MPEG1 OR MPEG2 recording system.
Raw: Disc audio raw data will be output. Select "Raw" if
your amplifier supports "DTS".
Off: To disable Digital Output.
Notes
• When you make a connection to a TV, Dolby Surround
Pro Logic or stereo system via the analog audio jacks,
select "PCM" or "Raw".
• If this DVD player is connected to a TV using HDMI,
make sure to select "PCM".
Night Mode
Night mode is equivalent to Dynamic Range Compress.
When it is On, it reduces the variations between loud and
soft sounds in audio output. You can still hear softer sounds
and dialog even in very low volume.
1) Press SETUP button.
2) Press
/
button to select Audio.
3) Press
button, then use the
/
Night Mode.
4) Press ENTER button, then use the
select On or Off mode.
5) Press
ENTER
button.
6) Press
SETUP
button to exit the
menu.
Note
Night mode is Dynamic Range Control (DRC) option for
analog audio output.
32
Rating
button to select
Off
PCM
Parental Control
Raw
DVDs equipped with the password function are rated according
to their content. The contents allowed by a parental lock level
and the way a DVD can be controlled may vary from disc to disc.
For example, if the disc allowed, you could edit out violent scenes
unsuitable for children and replace them with more suitable
scenes, or you could lock out playback of the disc altogether.
• DVDs may or may not respond to the parental lock settings.
This is not a defect in the DVD player. Make sure this function
works with your DVDs.
1) Press SETUP button.
2) Press
/
to select Rating.
3) Press
button to
select
Parental
control, then press
ENTER button.
"Enter Password"
screen will appear.
4) Press "8888" using number buttons. (Please note, this
is presetting password of this unit). Then press ENTER.
Press ENTER again to list the parental level.
The parental lock level is equivalent to the following ratings:
Level 1: Kid Safe
Level 2: G
Level 3: PG
Level 4: PG-13
button to select
5) Press
/
to select the rating from 1 to 8. Rating one (1)
has the most restrictions while rating eight (8) can virtually
playback all DVD software.
/
button to
6) Press OPEN/CLOSE button to activate the Parental Level
setting.
If the DVD has been designed to temporarily cancel the
: PCM
Parental Level, the screen will change depending on which
Off
disc is played. If you select "YES" with the ENTER button,
On
"Enter Password" screen will appear. Input the 4-digit
password as you have set then followed by ENTER button
and playback will start. If "NO" is selected, press the OPEN/
CLOSE" to remove the disc.
Notes
• If you input a wrong password, press CLEAR button and
re-enter your 4-digit password again.
• You cannot play DVDs rated higher than the level you
selected unless you cancel the parental lock function.
Parental control
: 8. Adault
Set Password
DVD
Parental control
: 8. Adault
Set Password
Enter Password:
Level 5: PG-R
Level 6: R
Level 7: NC-17
Level 8: Adult