Toshiba TDP-EX20U - Short Throw DLP Projector Benutzerhandbuch - Seite 46

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Projektor Toshiba TDP-EX20U - Short Throw DLP Projector herunter. Toshiba TDP-EX20U - Short Throw DLP Projector 50 Seiten. Toshiba tdp-ex20u: specifications
Auch für Toshiba TDP-EX20U - Short Throw DLP Projector: Spezifikationen (2 seiten)

Toshiba TDP-EX20U - Short Throw DLP Projector Benutzerhandbuch

Trouble indications

The indicator lights to inform you of internal abnormalities.
No power
Problem with projector
(Off)
Unplug the power cord, and contact your dealer.
Lamp went out during use, or won't come on
⇒ Lamp temperature is high so that it is difficult to turn on, the
(Red lit)
lifetime of the lamp has ended or the projector is malfunctioning.
(Red flashing)
Unplug the power cord and wait for a short while, then turn the
Or
power back on.
If a lamp burns out, replace it with a new one.
(Red lit)
(Red lit)
Power went out during use
⇒ Internal overheating, or the outside temperature is too high.
Place the projector so that the air intake and exhaust are not
(Red lit)
(Red
blocked.
flashing)
Unplug the power cord and wait for a short while, then turn the
power back on.
The
icon will appear before the power goes out.
Power went out during use
⇒ Problem with internal cooling fan.
(Red lit)
Unplug the power cord, and contact your dealer.
(Green
The
icon will appear before the power goes out.
flashing)
Power went out during use, or power won't come on
⇒ The lamp cover is not properly attached.
(Red lit)
Unplug the power cord, and reattach the lamp cover.
(Orange
flashing)
Power went out during use
⇒ Problem inside the projector.
(Red lit)
Unplug the power cord and wait for a short while, then turn the
(Orange lit)
power back on.
Or
If the above action will not clear the problem, unplug the power
cord, and contact your dealer.
(Orange
The
icon will appear before the power goes out.
flashing)
Note
After there is an abnormal indication, the abnormal status remains until the main power
switch is turned off.

Others

p.86
90

Before calling service personnel

If you think something is wrong, check the followings before contacting customer service.
Please see "Trouble indications"
as well.
p.90
If This Happens
No power
Is the power cord plugged in? Is it connected to the projector?
Is the main power switch turned on?
Is the outer lamp cover attached properly?
Is the lens cover open?
Power goes out
Is the ambient temperature high?
during use
Is the air intake or air exhaust blocked?
Is the lens cover open?
No picture
Is the projector turned on? (When [Auto input search] is [Off])
Is the mute function on?
Is the brightness setting minimized?
Are the connections set up correctly?
Are all the connected devices functioning properly?
No audio
Is the mute function on?
Is the volume setting minimized?
Are the connections set up correctly?
Are all the connected devices functioning properly?
Picture not
Is the input signal supported by the projector?
displayed
Is there something generating an abnormal video signal, for
correctly
instance the video tape?
Picture blurred
Is the lens dirty?
Part of picture
Is the lens focus adjusted optimally?
out of focus
Is the projection distance within the projector's supported range?
p.23
Is the projector's screen placement angle tilted too far?
Are the sharpness or sampling phase adjustments off?
Image is dark
Are the brightness or contrast adjustments off?
Is the lamp nearing the end of its service life?
Colors too light
Are the color, tint, R-level, G-level, or B-level adjustments off?
Bad shading
Is the screen dirty?
Is the blackboard mode set properly?
Is the lamp nearing the end of its service life?
Control panel key
Is the key lock function on?
doesn't work
Check
p.26
p.86
p.26
p.90
p.90
p.26
p.34
p.38
p.24
p.34
p.29
p.24
p.94 p.95
p.89
p.29
p.23
p.38
p.38
p.45
p.43
p.45
p.45
91
p.43
p.38