Toshiba TDP-T90AU Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Projektor Toshiba TDP-T90AU herunter. Toshiba TDP-T90AU 48 Seiten. Toshiba tdp-t90au: specifications
Auch für Toshiba TDP-T90AU: Spezifikationen (1 seiten)

Seite drucken
Toshiba TDP-T90AU Benutzerhandbuch

POWER SUPPLY CORD SELECTION

If your line voltage is 220 to 240V, use one of the following types of cable.
Plug
configuration Plug type
EURO
UK
Use a 5A fuse which is approved by ASTA
or BSI to BSI362.
Always replace the fuse cover after
changing the fuse.

IMPORTANT PRECAUTIONS

Save Original Packing Materials
The original shipping carton and packing materials will come in handy if you ever have to
ship your projector. For maximum protection, repack the set as it was originally packed at
the factory.
Moisture Condensation
Never operate this unit immediately after moving it from a cold location to a warm location.
When the unit is exposed to such a change in temperature, moisture may condense on
the lens and the crucial internal parts. To prevent the unit from possible damage, do not
use the unit for at least 2 hours when there is an extreme or sudden change in tempera-
ture.
Place and Manner of Installation
• Do not place in hot locations, such as near heating equipment. Doing so could cause
malfunction, and shorten the life of the projector.
• Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts, shortening
their lives, and darkening the screen.
• Do not use this product in the upright position or tilt it up or down by more than 20° from
level. Doing so may cause a failure or shorten the life of the product.
• Using this instrument near a TV or radio may cause interference to the images or audio
sound. If this happens, move it away from the TV or radio.
• Moving the projector from a low-temperature room to a high-temperature room may
cause condensation on the lens or internal parts in the instrument. If you continue to use
it in that situation, the malfunction may result. Ensure to wait until the condensation natu-
rally disappears.
• In a high altitude location where air is thin, cooling efficiency is reduced so use the pro-
jector with [Fan mode] set to [High].
Plug
Line voltage
configuration
220
240V
220
240V
9
Plug type
Line voltage
Australian
200
240V
10A
Switzerland
200
240V
6A
North American
200
240V
15A
240V
240V
240V