Toshiba TLP-S220 Benutzerhandbuch - Seite 26

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Projektor Toshiba TLP-S220 herunter. Toshiba TLP-S220 37 Seiten. 3 lcd data projector xga / svga / high brightness / with pc card slot & document camera
Auch für Toshiba TLP-S220: Benutzerhandbuch (37 seiten)

Seite drucken

Using the document camera (Continued)

r Select the projector on which the images

were temporarily saved in step

A list of the MAC addresses of the wireless

LAN PC cards

p.32

p.60

mounted on the

projectors that are available for communication

appears. (If projector name has been set up

already, it is shown instead of the MAC

address.) Select the desired projector from this

list.

Then icon

is displayed on the projector's

screen for few seconds.

t Click on the

button.

If Open a file was selected in step e

Open the JPEG file sent from the projector, and display it on the computer. The

software application linked to the jpg extension on that computer displays the file.

If Save to Disk was selected in step e

A dialog box appears, prompting you to select a location in which to save the

JPEG file sent from the projector. Specify a file name in this dialog box to save the

file.

To view or save another image from the camera, repeat w and e of step

, and t of step

as many times as necessary.

Notes

• Only one image can be saved on this projector temporarily at a time. If another image is

saved, the current one is overwritten.

• Any adjustments other than CAMERA GAIN (+/–) and Sharpness will not be reflected

on the forwarded image.

• It is not possible to photograph resized or frozen images.

• The size of the saved file will vary, depending on the image.

I Storing the camera images into the memory PC card

Models equipped with a PC card slot are able to save image data taken with the

document camera onto a memory PC card (sold separately) in JPEG format.

Mount a memory PC card into the PC card slot

Mounting a PC card will switch to PC card input if Input select mode is set to Auto on

the PC card setting menu

p.55

. In this case, press the CAMERA button on the

Camera control panel to switch to camera input.

Display the camera image, and press the STORE

IMAGE button.

A message appears on the screen, confirming that you wish to

save the image.

Press the

buttons to save the image.

(To not save the image, use the

Data save to the memory PC card begins.

The

icon will appear on the upper left of the screen during saving.

Never remove the memory PC card during a save. Doing so could corrupt your

data, or damage the PC card.

When the writing is complete, the icon disappears and a message appears informing

you that saving is complete, then disappears after a few seconds.

Repeat step

2 3

as necessary to store more images.

Check the saved file, if necessary.

Use the steps in "Projecting images stored in a memory PC card"

contents of the file or image. Images are saved in the memory PC card's _doccam

folder in JPEG format. If there is no _doccam folder, the images are created in the

memory PC card's root directory.

Notes

• Any adjustments other than CAMERA GAIN (+/–) and Sharpness will not be reflected

on a JPEG file saved on the memory PC card.

• It is not possible to photograph resized or frozen images.

• Saved files are saved with names in the range of pix001.jpg to pix999.jpg. If there is

already a file named pix999.jpg, no more files can be saved.

• The size of the file will vary, depending on the image. The number of files that can be

saved depends on the size of the files and the capacity of the memory PC card.

• Do not mount a write-protected memory PC card into the projector. It may become

impossible to access the memory PC card.

(Models equipped with PC card slot)

p.23

W.BALANCE

OVERLAY

LOCK

STORE

CAMERA

IMAGE

GAIN

buttons to select No, then press the

button.)

p.42

to check the

ARM LIGHT

CAMERA