Croydex MM720800E Schnellstart-Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Inneneinrichtung Croydex MM720800E herunter. Croydex MM720800E 7 Seiten.

Place the bottom edge of the Hang 'n' Lock

bracket onto the lower reference line and mark

a screw hole position in each cam hole recess.

Remove the bracket from the wall.

(See Fig. 5)

Drill holes to a depth of 45mm and insert

the wall plugs level with the surface of the wall.

Insert the countersink screws through the Hang

'n' Lock cams and loosely secure the Hang 'n'

Lock bracket to the wall.

The wall plugs supplied are for use on solid

walls only. For cavity walls or plasterboard use

specialist fixings that are available from all

(See Fig. 6)

good DIY stores.

Note: if you are fitting the product to a

tiled surface, insert the wall plugs below the

surface of the tile to avoid cracking the tiles.

With the Hang 'n' Lock bracket loosely

attached to the wall, adjust for height and

level by rotating the cams with a flat head

screwdriver. Use the attached spirit level as a

guide. Once complete, use a Phillips screwdriver

to fully tighten the mounting screws to securely

fix the bracket into position.

(See Fig. 7)

Note: The position of the

mirror can be adjusted by

sliding left or right along

the bracket.

fig.5

fig. 6

fig. 7

COUNTERSINK

HOLE

MIR 034 R04