Dimplex BS 1201 S Installations- und Betriebsanleitung - Seite 6
Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Heizgerät Dimplex BS 1201 S herunter. Dimplex BS 1201 S 16 Seiten.
Seite drucken
English
Due to the heat radiation of the device, the surface on
which the device is installed can darken in colour.
NOTE
NOTE
Installation on wooden walls is permissible.
Remove transport fastening
Loosen the front grill screws (A) and remove the
front grill.
Remove the transport fastenings (B) from the heat-
ing elements.
Re-attach the front grill.
3. Wall mounting
To achieve the stipulated minimum installation height
of 1.8 metres, the mounting holes for the wall holder
must be drilled at a height of 1.9 metres.
Loosen the screw on the connection compartment
cover and remove the cover.
Fold the radiator forward.
Mark and drill the mounting holes on a vertical wall
and insert dowels.
Insert spacers with screws into the openings of the
wall holder and screw the device into place.
EN-6
4. Electrical connection
The voltage specified on the type plate must match the
mains voltage.
The installation of this heater must be carried out by a
competent electrician in accordance with the current
safety regulations. Heating device must be earthed!
Connection only to fixed installed cables!
The connecting wires of the power lines must be fitted
with a heat-resistant protective hose.
A separator with a minimum contact opening of 3mm
must be provided on each pole in the permanently con-
nected electrical installation (e.g. a circuit breaker).
It is recommended that a separate circuit be provided
for the power supply.
5. Operation
The desired heating level can
be set by pulling the cord switch
once or repeatedly.
The set heating level can be
read in the display window.
In position 0, the heating device
is switched off.
The radiator heats the objects or
persons upon which/whom it is
directed without also directly
heating the indoor air.
The radiator can be tilted down-
wards by a maximum of 40°.
CAUTION!
Adjustments may only be made when the de-
CAUTION!
vice is fully cooled. Danger of burns!
Power output in switch position
BK 1202 S
BS 1201 S
W = output power in watts.
BkBs_By_EN.fm · 1709
BK 1202 S, BS 1201 S
Display 0
Display 1
Display 1
Off
600 W
600 W
Off
600 W
600 W
www.dimplex.de/en
Display 2
1200 W
1200 W