CRRC MS-ZD20S Handbuch für Betrieb und Wartung - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Werkzeuge CRRC MS-ZD20S herunter. CRRC MS-ZD20S 9 Seiten. Battery installation tool

Seite drucken

眉山中车紧固件科技有限公司

Jaw Assembly

A.（h）Connecting shaft （f）Snap ring

（g）Jaw

B. To rotate the jaw (g) which needs to be replaced into thread of connecting shaft (h) along clockwise direction,

and let the end face of jaw (g) fully fit with front step surface of connecting shaft (h).

C. To check whether the concave of jaw (g) is stuck with tap of snap ring (f), if it occurs, rotating the jaw (g) to

adjust.

Note: In the premise of the stuck situation, the clearance between the end face of jaw and front step surface

of connecting shaft shall be the minimum value (to the best of tightening).

Anvil Assembly

A.（d）Limit sleeve （e）Anvil

B. To rotate the anvil (e) which needs to be replaced into thread of limit sleeve (d) along clockwise direction, and

tighten the anvil on the limit sleeve by wrench.

Note: Tightening the anvil on the limit sleeve and there shall be no clearance between two components by

visual check.